SRAM DUB 12 Speed Crankset And BB Removal Guide

Buy me a coffee

Follow me on Instagram

Thanks for watching.

[olsmxl]

That was one of the best and easiest to follow service videos I have seen

[veste]

You are one of my top favourite bike gurus. You just explain things plainly, helping nobodies like me servicing their own bikes.

[Happy_Shopper]

''Make sure you've got a good 2 foot, 3 foot bar''

Me: *Stares intensely at multi-tool

[timstaples]

The most informative video on this subject I've seen .

[G-man]

Great video. Very thorough. I used it to walk me through taking my crank off to re-grease and tighten everything up from a sinister creak when I pedal. If it wasn’t for this video I would have had to leave it at a bike shop for who knows how long.

[ashevillescarborough]

Thanks for the time and effort to put this out… new to SRAM, now no longer intimidated. Perfect

[beespitapiary]

Awesome tutorial on taking off and reinstalling the DUB crankset.

[fakescars]

Thank you sir! Very thorough and easy to follow instructions as always. You should get an award!!

[davejs]

I wasn’t looking forward to this job but you simplified it nicely. Nice work!

[rollwithmemtb]

This is exactly the information I was looking for. Thank you for putting the time and effort into this video. Very helpful!👍

[CruiseKev]

My day started by finding my 14 year old son taking apart his 2020 Giant MTB crank set to do some "maintenance". When ever I see my son do these things, I usually run (sprint) into the shop to assist, as we know it's much easier to take things apart than assemble! Thanks for the video, it helped immensely!

[Ripper]

@Free To Cycle, thank you very much for taking the time to do a step by step tutorial on the removal & installation for the SRAM DUB BSA bottom bracket. I just purchased the SRAM Eagle Nx version, and your video goes into much greater detail than the one on the actual SRAM website. Also, thank you for pointing out not to over tighten the 2mm retention allen screw, as I've read incidents where people have stripped them out, and damaged the bearings. I love your videos, as well as RJ the Bike Guy's videos as well. Keep up the great work, and have an awesome day!!

[johnbaker]

Yet another great video. Awesome. I always come to this channel for advice. Saved my Axx many a time. Lack of LBS staff resources = need to do your own work

[-TRIPLE_A-]

I was searching all evening for a video that would help me uninstall my old kit then install the new stuff, and nothing was really hitting the mark until I saw this video. Thanks so much! And, bonus points for the pronounciation of "drive side" haha. Nice one.

[garcurran]

Yes, I totally agree with last post, informative and also helpful, on my trek bike, 9 months after purchase, the bearings are clicking. I have no faith in shop, so i will remove and clean myself. Thanks for taking the time to put this presentation together.

[peterahlstedt]

Thanks for easy and clear instructions.
I have a TREK DOMANE with SRAM RIVAL, one year old and I have ride it around 6000 km and only one short rain and bottom bracket is totally warned out !!

[sinodraagi]

Thanks a million! Just installed a dub powercrank following your steps ❤

[ipaterson]

Used this on the weekend to get my crank set apart. Great guide, thank you so much!

[TheWoodbag]

This didn’t work for me but glad it worked for others. I took my whole bike wheels, rear mec, took the Allen and then used my whole foot to loosen that thing. What a nightmare taking cranks off was after this. Cheers

[lfbarni]

This was very helpful, thank you! I didn't remember how exactly the dub release mechanism worked and this made me safe to do my work. :)