500 MCQ's from Previous Year Question Papers (JE) (2016-2020) | Civil Engineering

preview_player
Показать описание
Buy STANDARD Objective Type Books and Handbook on Civil Engineering.

Youth Competition Times JE (15753 MCQ's) (Vol. 01)

Youth Competition Times AE (22190 MCQ's) (Vol. 01)

Gupta & Gupta

SSC JE 2023 Previous Years Topic Wise Objectives by IES Master

SSC JE MAINS 2023 Conventional Solved Papers by IES Master

3,200+ MCQ's for PSU's by Made Easy

Handbook on Civil Engineering by Made Easy

This video contains mix questions of all of the subjects of Civil Engineering, which are previously asked in various 'JE' exams (2016 -2020).

Do watch this before any 'JE' exam.
This will be helpful for ONE LINER questions of Civil Engineering.

Thank you!

#civilengineering #mcq #ssc_je #jsscje #thdc_je #nhpc_je #ddaje #ukpsc_je
Рекомендации по теме
Комментарии
Автор

CORRECTIONS :

Q59. Correct Ans is Option (C) 30 minutes.
(5 minutes Quick setting cement ka hota hai)

Q387. Correct Ans is Option (C) Parallel to each other

PankajMadwan
Автор

Q-34. For Road construction Blast furnace Slag cement used.
Q-108. Normally provided 50mm but in sea water 75 mm cover provided so additional 25mm is required.

abhijitpaswan
Автор

Q. 322 -> As Poisson's ratio decreases with the strength of concrete, a rich mix of concrete is high in strength that's why option C is correct.

subhadipchakraborty
Автор

387 option c is correct
Plumb Bob lines at different places parallel to each other in case of plane survey

rashmi
Автор

Q. 387
In plane surveying, we assume that earth surface as plane. So shouldn't it be option (c) that plumb line is parallel as the surface is plane

suyelaktarmazumder
Автор

Q59 is 30 mins.
Only quick setting cement is 5 mins and final 30 mins.

imlisanenkichu
Автор

at 2:06:20 the question mentions plane surveying so we will not consider the curvature of the earth. The correct ans is (C).

neelankusekhar
Автор

Curing is the process of reduce water from hydration

sujitthakur
Автор

Expansion joint are provided for plane change abruptly .are provided to ensure minimum resistance

sujitthakur
Автор

Q. 387 ka ans c hona chahiye.
In plane survey, survey lines is straight and hz. Considered.

nurtujahussain
Автор

thankyou. these videos are helpful for revision. your dictation is very clear and i wish you woul include these small and fast explaination to more

meghalayatrails
Автор

32 )- ans - load bearing strength of rivet

AM
Автор

for standered compact test ratio of cement and sand is 1:3

sujitthakur
Автор

flownet is drawn to obtain exit pressure uplift gradient and seepage

sujitthakur
Автор

Important constituent of cement are .
Silica-upto 62 to 65 percent

sujitthakur
Автор

Water content in soil can be measured by over dry method and sand bath method and over dry method is most accurate method

sujitthakur
Автор

Alumina impart plasticity .excess of alumina make the brick crack and warp

sujitthakur
Автор

Liquid limit can be obtained by adding plasticity and plastic limit

sujitthakur
Автор

Initial setting time of rapid hardening cement is 30 mnt

winninghours
Автор

angle of declanation is the angle between geographical meridian and magnetic meridian

sujitthakur