filmov
tv
Κατασκευή ηλεκτρικό Καπνιστήρι How to make an electric bee smoker

Показать описание
Υπάρχουν και 3 - 6 βολτ Ανεμιστηράκια, που δίνουν αρκετό αέρα εύκολη κατασκευή ,για να ενώσετε τα κουτάκια, βάλτε ταινία αλουμινίου άκαυτη,βάλτε και διακόπτη, δοκιμάστε και πελετ με ξερά χόρτα , σας ευχαριστώ ,αν θέλετε εγγραφείτε στο κανάλι μου
How to make an electric bee smoker -
Using two aluminum cans, a small PC fan and a few batteries to get 6, 9 or 12 Volts, you can make a simple bee smoker for your honeybees.
The front can will have the burning material and the rear one will act as a kind of prechamber for the air that the fan blows.
Make a few holes in the bottom of the front can, to keep the burning material from falling into the rear can and on the fan, and connect the two cans with aluminum tape that can stand the heat.
Place the fan in the back of the rear can and simply connect the fan to the batteries. That's it. That's the whole idea.
You can add a switch for convenience and as a burning material you can use either dry grass, or wood pellets, or start the fire with a piece of newspaper and add wood chips if you can find any.
Remember when putting it down, to keep the front end at an angle, looking higher than the rear, so that the smoke goes out the front end, and doesn't flow through the back end, where the fan is.
Also remember that eventualy you will inhale some smoke, so avoid any burning material that may contain chemicals.
Thanks for watching, and if you like what you see, consider subscribing.
How to make an electric bee smoker -
Using two aluminum cans, a small PC fan and a few batteries to get 6, 9 or 12 Volts, you can make a simple bee smoker for your honeybees.
The front can will have the burning material and the rear one will act as a kind of prechamber for the air that the fan blows.
Make a few holes in the bottom of the front can, to keep the burning material from falling into the rear can and on the fan, and connect the two cans with aluminum tape that can stand the heat.
Place the fan in the back of the rear can and simply connect the fan to the batteries. That's it. That's the whole idea.
You can add a switch for convenience and as a burning material you can use either dry grass, or wood pellets, or start the fire with a piece of newspaper and add wood chips if you can find any.
Remember when putting it down, to keep the front end at an angle, looking higher than the rear, so that the smoke goes out the front end, and doesn't flow through the back end, where the fan is.
Also remember that eventualy you will inhale some smoke, so avoid any burning material that may contain chemicals.
Thanks for watching, and if you like what you see, consider subscribing.
Комментарии