HIGH TORQUE BATTLE! New Parkside Performance PASSP C4 vs Gisam / ONEVAN 2800Nm vs Milwaukee M18 FUEL

Video timeline:
00:00 - Introduction
02:15 - Van test
03:05 - Lorry test
07:06 - Tractor test
11:20 - Parkside vs Gisam internals
16:13 - OLD vs NEW Parkside PASSP models
18:20 - Questionable ending

In this video I attempt to test high torque impact wrenches as best I can.
In the video you will find these 4 impact wrenches:
- Milwaukee M18 onefhiwf34
- Parkside Performance PASSP C4 - owim
- Parkside Performance PASSP A3 - kompernaß
- Gisam (Aliexpress can be found under other brand names) - model N/A 2800Nm

The EXPERT mode on the C4 was a hard task to handle. Never managed to get it going with the 8Ah batteries, even with the 4Ah ones it was a hit and miss. The phone had to stay connected to the tool for as long as I wanted to have the EXPERT mode enabled. The two stayed connected for no more than 10-15 seconds at a time. Possibly better results on Android! The EXPERT mode does require the use of an 8Ah battery for best results.

In general all of these tools benefit from a large battery. Especially noticeable on the Parkside impact wrenches. The best compromise between performance and weight is still the 8Ah battery.
____________________________________________________

____________________________________________________

I hope you appreciate the effort! If you have not done so, please consider liking the video and subscribing to the channel! Also leaving a comment helps enormously!

No copyright infringement intended!

[fabsenbmx]

Almost fell off my chair laughing at 5:23 and I am not even mad. That was really unexpected.
Awesome Video as always man! Really love the Parkside content

[TestAndReview]

Great video mate! 5 year warranty is hard to pass on such a tool. I'd buy the Parkside just for that.

[PetyrWo]

Fantastic video! Great edit and superb insights! 05:23 was too funny 🤣🤣🤣

[Vrabetzz]

It would be great if TTC could get their hands on all the Parkside tools. While rusty nuts are probably the best solution without some expensive equipment, they vary a lot. Or perhaps once this channel has enough success to be called "Rich Life EU", you can buy all the equipment and tools and afterwards can rename the channel back since you are probably broke again at that point...

[YavorDimitroff]

Very informative on the gears and overall amazing work 👌

[DarioBattiston]

hi colleague! you always beat me to the videos!! 😂😂 Anyway, excellent explanation, I have the B4 at home, soon I will also get the C4 like yours so I will make the video together. A piece of advice.. use the Milwaukee with 8 Ah, I also have it and it works best with a more powerful battery😉

[maorindranaub]

Wooaw ! THAT is a comparison test 😮
Thank you !

[raimondszunda]

Great stuff, thanks! Keep posting this kind of content! Got high torqe Passp c4 for 90 eur in Latvia, and ordered Gisam "1800nm" for tighter spaces. Could not resist since in Latvia there is no online Lidl store. And 5 year warranty is huge plus.
I belive Gisam 1800 model is a copy of Makita dtw700, but there are no side by side review video review on YT. Maybe future video idea for you? 😂

[XlblackshibaXxl]

You are the best ...thank you and happy new year❤❤❤

[krzychujerzyna]

❤❤❤ This is Best test i YouTube. Thanks

[yannyspawn]

Super vidéo comme d'habitude, il aurait été intéressant de comparer à la B4 précédente de Grizzly tools car elle la remplace. Pour ce qui est du choix, la gisam non merci pour moi c'est pas fait pour durer et tu l'a bien expliqué. La milwaukee, OK c'est du bon matos, mais le tarif est conséquent. La parkside A3 est un ancien modèle et en France vendue dans les 140 €. La C4 (tout comme la B4) à été vendue à un certain moment à 60 € (toujours en France). C'est pour moi le meilleur choix, même si moins performante que la A3, la différence de prix fait justement la différence. 😁😉👍

[Gabson]

Just bought the gisam for 62$. It`s amazing how technology evolves. Just 10 years ago for 60 dollars you could by... nothing that`ll unscrew more than a 20nm water pump bolts. Now they do 300nm wheel bolts like a cake.
Do you make the battery adapters, or you bought it from aliexpress?

[Marek-ou]

Where are you finding these battery adaptors? Have you done a video on them at some point?

[leedsguyuk]

Excellent, liked & subscribed
👍👍👍👍👍👍👍👍

[alouisschafer]

Thinking about getting the Onevan Impact. My tools are all Makita so I have proper Makita batterys that can give it all the power it needs.
I will see what is the most powerful impact for under 100€ and buy that plus a Makita to Parkside adapter if I end up buying the Parkside.
An original Makita isnt worth the money for the few times a year I would need it.
Makita has super strong impacts like the DTW1002 and DTW1004 but those are almost 300€. Well worth it for professional use but not DIY.

[Mansyansbbsanbs]

I wonder how hyper tough would battle against Parkside 🤔 love the videos!

[oktanpista]

Hi there! I bought a PASSP 20-li C4, and the Lidl Home application noticed me, there is a new firmware for the device. I downloaded it, and since then the tool stopped working. Not even the torque selector or the working LED emitting. Do you have a clue, what to do with? Thanks!

[nincsneve]

5:48 I think changing to the Gisam or the Milwaukee for the stubborn nut would have looked better. Just to see which one destroys the thread faster.

Anyhow, thanks for the content! Keep them coming :)

[markwilliams]

Just found Your channel and have subscribed.Can you help ? I was given a Day Plus Cordless Impact Wrench .However I would like to use it with a Parkside battery . I was wondering if an Adaptor is available ? Or would you know if any other batteries would fit ? The tool works fine at the moment but I am concerned about the quality of the Chinese batteries it's using. Brilliant Channel !

[matox.]

what the adapter in gisam to parkside?