BMW key battery replacement (without comfort acces) / how to change battery / E90 key fob DIY

preview_player
Показать описание
It would have cost me 200 dollar for a new key, now I changed it myself for only 5 dollar...
Please subscribe for more videos and comment if you have any ideas!

Battery: bought on ebay for 5 dollar. Search for: Panasonic 2020 with legs or BMW key battery

Sound: I do not own any of these rights. Please let me know something if it's against any rules.
Рекомендации по теме
Комментарии
Автор

BMW should be ashamed of themselves for giving people a key fob that’s impossible to change the battery on, smh

abelucious
Автор

Thank you for the video, I didn’t know how to replace the battery for this type of key. Will save me money, thank you, I’ve liked and subscribed 😎

syberkd
Автор

I opened mine with a knife, replaced the battery and used some tape to hold it together on the sides. And it works again!

florianthill
Автор

BRO i did the thing as you showed but key functions good but it can't go into the whole so i can't start my key the key anymore because it doesnt fit anymore...please you have advice to help..?

chakabakaofficial
Автор

hoi welke type batterij moet ik kopen.op de oude staat vl2020 panasonic, maar op onlineshop zie ik dat ze van zelfde type 2 soorten verkopen.Welke is de goede eigenlijk?Panasonic VL2020-1VCE Oplaadbare knoopcel VL2020 Lithium 20 mAh 3 V 1 stuk(s) of is het die andere >><>>>> Panasonic VL2020-1HFE Oplaadbare knoopcel VL2020 Lithium 20 mAh 3 V 1 stuk(s)???

drama
Автор

I used a Dremel tool with circular cutting blade and it took me one minute to disassemble the two pieces. Then sealed it back up with black silicone. Thanks for the video and battery identification.

milovan
Автор

You should have tested your remote after you replaced the battery to show people the remote actually works with the new battery.

joemonday
Автор

What yr & models does this video cover - thank you 🙏

garygentzel
Автор

I did the same thing, the car starts but the buttons dont work, what should I do to programm the buttons?

upeguii
Автор

Hi, there is any time until you must replace battery? I heard something to change until 3 minutes, right?

marcell
Автор

Sorry for my wrong reply to WheepyMAW ! The battery is really RECHARGEABLE. It recharges through the LC 125 kHz resonant tank on the same PCB side where the battery is mounted. But, as any rechargeable battery, it wears out as time passes and recharge number increases.
So a battery substitution becomes unavoidable after many years. You can try to fit a non-rechargeable battery, but it will suffer overheating and power drop if car is used (the key is in car immobilizer transponder range) for long times.
For door open / close there is a separate 315 / 433 MHz pure transmitter IC supplied by the battery with a separate, different antenna.
Nevertheless I cannot guarantee that you do not need a rolling code reset of the part by some specific SW, that is to say it could be you experience a fail in the substitution.

fabriziobassi
Автор

Could you have softened the already made solder and changed the battery?

audunjemtland
Автор

Thanx. Easy fix and everything works again.. also the open and lock buttons.. thanx for the video.

thijsn
Автор

Pde yg tengk video ni kalau xpandai buat jgn buat takut remote tu rosak😇 sekian terime kasih

syazmira
Автор

How do you remove the battery? It is soldered in so it can’t be removed.

_JimmyBeGood
Автор

Does the key have to be reprogrammed after battery change? I only have one key on me so I'm hesitant to do this.

Jaketson
Автор

How do you take the battery off tho? I don’t have the tools really, I think

nevesxy
Автор

Bkn ke dia cas mase kte dh masuk kan kunci tu time nk bwk keto

muhammadrizal
Автор

No links to the battery like you said you would.

nick
Автор

I'm so close to being done with bmw, period. Plastic parts, recalls, ridiculous key fobs .... I really don't have time to raise a car like a baby.

cleangal