BLHeli ESC Firmware fail fix tip - Read description

[TheRealSteveology]

After several weeks unable to read my ESCs, this fixed it. Noob = frustrated. Your video = WIN! Thank you!

[micsherwood]

YOU ARE MY HERO! I have spent 15-16 HOURS going through Utube looking for a fix, for BF and BLHeli not "seeing" ESC #4.

[ThomasShue]

My FC connects fine to BF but will not connect to BL heli Suite (the real one)

[mikehauk]

I recently believed I bricked my Tryo69.... Did a shit ton of throwing shit across the room, yard, over the wall, at random people and of course fui (flying under the influence) breaking shit on purpose.

I found your video and BAM! You gave me hope! Watched a few more of your videos because, let's be honest... They were very literally educational! For that I thank you.

Anyhow.... Thought my shit was bricked. Broke alot of shit, threw even more shit, u neighbors came up on some of my shit (needless to say) and so my very short journey began.

I didn't brick my shit. I simply flashed the wrong damn board onto my quad was all. Smh. I can be such a muppet sometimes I swear.

Great videos tho 4real.
Keep up the good work!

[Motivational-dc]

Connection to Esc#1 failed please check data - und power - connections to the esc. What to do please help me...

[alloffakind]

it dohnt show me like 1234 by me is like 234 esc and 1 ....the program want read it..i solder all good i chek 100 time all the conections..i look for shorts and all good .. if i arm the quad will spin just 3 motors i chnge the motor also and the same issue

[AsgardStudios]

You saved my bacon 4 years later! Thanks so much!!

[fpvpanda]

Did they remove these fictions from the new configurator? I’m not using the chrome app and don’t see this version the only version in the folder has no drop downs

[kirkglundal]

I have downloaded and opened BLHeliSuite32 on both my Mac and wife's PC but I still keep getting an "unable to open port "..."" error. I am unable to select a port in the port drop down menu on either the mac or pc. This happens regardless which interface I select. Please help. Thank you!

[qfpv]

THANK YOU! I thought my ESC was junk and was going to have to be replaced...whew! I have 2 more that I have to do then I can install RPM filtering on all of them. :).

[micsherwood]

I have used this method in the past and it worked. Now i have a Skystar H743 stack and i am still not able to get the configurator to see the esc, using this. Have the steps changed, since you made this video?

[martingarne]

thanks to this i fixed two esc's that i bricked earlier trying to update. big thanks.

[flyguytruckguy]

For the longest time, it's been hit and miss with flashing ESC's. After watching this, I now know what I'm doing, kinda. It works!

[Allseasonaffair]

I think I bricked my Crazebee F4 v2 It allowed me to flash blheli32 and my esc I believe are blheli S. It flashed no problem but now esc are not firing up when I put a battery in. I can connect to my transmitter but thats it. Im in trouble arnt I?

[ClarkDroneFilms]

My 4in 1 connects but doesn't Read Setup. Nothing is detected

[ByunDan]

Thanks! Saved me a lot of time and got it working. Now realize that BLHeli32 has to be managed with BLHeli Suite 32.

[saschamuller]

Using this method I get a serial flash verify failed and the program tries twice to flash the esc but still no luck. Usually it runs around 50-60% and then drops back for a second try but even sometimes directly in the begging its giving up. Any ideas ?

[djs]

What if your esc 1 is just showing - - - -? I can’t seem to flash anything to it because it doesn’t recognize the esc at all

[PatrickGuerrisi]

what if my BLHeli sees 3 of 4 ESCs? this is even without doing your trick on this video.

[Motivational-dc]

Hey, Amar from India, I build a quadcopter but whenever I connect to Blheli it says connection to esc#1 failed. What to do please help me.