TST Tire Pressure Monitor - Set up and Install

In this video, we show you how to set up and install your 507 TST Tire Pressure Monitory System (TPMS).

[lcampm]

Better than manufacture instruction thank you

[PhotographybyTimWMoore]

Going to bother you once again. I bought a new random axle trailer. Thanks to your video, I was able to set up all 4 sensors, but I can’t get the monitor to set the maximum and minimum temperatures and tire pressures. Any suggestions???

[markruehle]

Great video, you made it easy to understand. I read that every year you have to change out the sensor batteries . What a about the battery in the head unit. I read you only have 4 years on it, which will probably on last 3 years with my luck. So does this unit go in trash or can you keep the power cord hooked up, so it will work. I see no way to replace battery in this unit. Any ideas? Thank you

[bobmakow]

Great video, I would caution against having all the sensors so close to the monitor when programming. Move the ones not being programmed further away from the monitor when programming an individual sensor.

[michellaporte.michel]

For what issue do I need install a signal booster

[nancychung]

Dealership set us up when we bought new RV. However, alarm goes off periodically but there never seems to be an issue. The last time it flashed red and then word pressure appeared in red when on the front left sensor. PSi set at 135 . Temp varies from 95 to 104F. We feel something is not right. What can we do?

[vmadar]

What if you have a unit that was working but now won’t turn on?

[rventureawaits]

Just bought this system from you all plus 4 additional sensors. The booklet doesn’t make it clear that we can have different pressures for each tire. For instance I run the front wheels on the truck at a higher pressure than the dually’s rear tires. The trailer tires are all the same but are also different from either of the truck’s settings. What’s the simple explanation to set pressures for each tire? Thanks.

[PhotographybyTimWMoore]

Andy, I have set up the cap sensors and I now have a problem that comes and goes. One sensor will work perfectly and the second May or may not work. I switched the sensors on our single axle trailer, and the sensors may or may not work for either sensor. Do you think I need the remote booster for a 20 foot trailer so that both sensors will work at the same time?

[stevedenoyer]

Great explanation the instructions seem a little difficult to follow and I learn easier with visual and by doing. I bought enough to do my tow vehicle too. Is this not common?

[robertwatkins]

Thanks! We have sensors inside the tire. is that what we program? Do we need the cap sensors too?

[gary]

Great video thanks I’m getting ready to install mine today 👍👍

[mathewczaster]

Great video! Thanks for the presentation!

[TravelingonAdventures]

Hey, I used to watch you all the time on another YT channel. What happened to that channel?

[marcdesjardins]

Appreciate the video. Easy to follow, which made my single-axle install a piece of cake. Thanks.

[ThePeteutube]

Leaving out the repeater is a big miss.