Jose Rodriguez Sublimation Series Episode #5 A Look at my Self Coated Substrates and CONDE Systems

Jose Rodriguez Sublimation Series Episode #5 "A Look at my Self Coated Substrates and Some CONDE Systems"
We talk a bit a bout what I have been manually coating for sublimation and the also the huge load of pre coated ready to be sublimated products from CONDE Systems. This is only the tip of the iceberg!

MY NEW MERCH SITE

Youtube:

Patreon:

Paypal Donations:

Amazon Afilliate Page:

FaceBook Private Group Photo Printing Techie:

My Products WebSite:

My Custom Photo Paper Profile Creation Site:

Best Printing and Layout program Qimage Ultimate:

QIMAGE ONE

700MML CANON OEM carts for the PRO-1000 and direct use on PRO 2000- and up

PRO-100/100s Cleaning Cycles

[photozen]

Am very glad you have your heat press fixed and if you think about it any one in this kind of business needs two, reason for that is each phase of the press on certain substrates may require different heat temp and different pressure, it will be counter intuitive to press with certain heat temp, then readjust the heat, wait and press again, rather each press is set for the desired temp and you just move your substrate from one press to another, I am thinking on getting another one for that mere reason .
You are an honest one of a kind man.
I am finding my self getting more and more into heat transferring papers especially forever laser dark and forever soft flex and am using the ghost white toner to print on dark garment and am opening a whole realm of possibilities, Still enjoying your videos and following closely the sublimation series, your results are AWESOME...!

[deannafenton]

I just love you and have so enjoyed and learned from you videos

[ILUVSTEFA]

Thank You so much for Your Awesome video!! I learned a lot! 🤗

[ttoddh]

hi this is the first video of yours I have seen. I did not see the product names for the 3 bottles you showed very briefly. The one with the yellowish solution was small, then you showed us the 9 parts to 1 part bottles, but I could not tell the names of either bottles. Can you fill that in for me please.

[chyldematias]

Im glad you got the heat press fixed! you had the hunch that the problem was the power button and you were correct.
Jose you also can try the aluminum License plates they turn out really well Conde also sells aluminum Cuff Bracelets that turn out so very goo after sublimation.. I made one that reads Puerto Rico and decorated with coqui and such..
By the way you are doing quite good with your coatings.
I was quite curious and as I was at Home Depot I purchased a 46cent Tile and a can of Clear fast drying Polyuretane I just sprayed the tile with about 3 coats I should have not placed in oven though since it turned a yellowish however I got to sublimate into it not perfect but it is possible.

[mrs.mallon]

Do you have a video showing the coating process? I found the clear coating from dyepress but I’m not sure what the white coating is you showed. I would love to see the actual coating process!

[pjf]

Hola Don Jose,
That is a very snazzy rack system you have there. Would you care to share some info about it..??
Very nice work, indeed..!

[Woodworks-zdiw]

is the white coating special, or can i just paint white then apply the polygloss

[xolveria]

Hola Don Jose.. I found UV Polyester Resin I cure un UV.. will this work does not need a catalyst. just cure under uv.. I am assuming it can then be sublimated

[Midnight]

Hi I love your Videos I am very new to this I would like to know first which coating to I get to sublimation tiles and mugs? I see you talk about dyepress poly-t, is that the only coating I will need? is it best to buy the mugs already coated? you also talk about an air brush i was looking om amazon can you recommend a cheap one that will do the job? One more question I work with clear polyester casting resin, is this the same as dyepress poly-t? sorry so many questions, thanks for your help.

[narimanrezaiee]

hello jose im from iran . thank you for your help . i have a big problem about sublimation on transparent acrylic . i cannot do this . before buy sublimation heat transfer and i making my product with uv flatbed . flatbed printing is really expensive in my country and i got to know sublimation . sorry for my bad english . please help me . i think my problem just coating . in my country i cannot find and but coating
Because of the US government sanctions iran and I thank for these sanctions, we are really upset, but I pray that the government of my country will change. We do not deserve to live this way . anyway can you give me a one way or can you help me to sublimation on acrylic . sorry for long reply .