MSI GF65 THIN ms-16w1 MSI-NL laptop charge port power jack repair fix charging connector replacement

MSI GF65 THIN ms-16w1 MSI-NL disassembly laptop charge port power jack repair fix taking apart tear down guide. Eindhoven 5706 5692 ER SON
We provide a fix on laptop battery not charging issue no power up issue and for loose dc jack if you have to wiggle jiggle the plug ( tip of your power adapter ) to make the system work.
Taking apart a laptop tear down disassembly guide faulty power jack broken charging port how to repair fix pushed in dc power jack How to repair or fix no power Do it yourself 101 tutorial on loose charging ports. How to hard drive replacement motherboard replacement and battery replacement.
How to Fix Laptop DC Power Jack Repair Charging Port

All of our tools for laptop computer repair and service (de-soldering braid, solder, flux, soldering iron, Kapton tape) could be found on our amazon page here:

Donations to improve the quality of video equipment are welcome here:
Sincerely thank you in advance. Timecodes
0:00 How to fix a laptop power jack
1:00 How to repair a laptop Power Jack
3:20 How to fix a laptop charge port
5:30 How to repair a laptop charging port
7:45 Charge port repair
9:00 Charging port fix
10:30 power jack repair

[kipperslapper]

Writing this comment from my newly repaired laptop - thanks to this video!

It was a long process but not too difficult, with the right equipment. The desolder braid was a must. I actually found it easier to remove the pins one by one, with them cut from the jack, rather than trying to remove it all in one go. Hardest part was the desoldering. New one went in very easy.

Thanks again!

[chrisob]

What brand of gaming laptop is the most reliable? I know from experience it definitely is not MSI lol

[SenileOtaku]

I find when dealing with those flat ribbon cables (that attach through those ZIF connectors) I use a pair of tweezers (the ones in my iFixIt toolkit are good for that). Forget trying to manipulate them with my clumsy fingers.

One thing to be VERY careful with for those flat/ZIF connectors though: some unlock by flipping up, some by sliding out. Be very sure to check which kind they are before opening them. I broke the power button ribbon connector on a Dell N7110 by opening it the wrong way (and I don't have the right soldering equipment or skill to fix it). So I have a machine that *was* working, but I can't power on anymore.

And as for that cordless screwdriver: wouldn't it be easier/better to use a cordless screwdriver instead? Something not so awkward? I think my B&D cordless was around $20.

(and I'll need to call tomorrow about repairing the board in my wife's GF65 Thin 9SD)

[willdarko]

Thanks for the video, helped a lot today!

[rustysiler]

I have this same computer and my port is still in place but the solder is broke on the back small silver pins so it only works of u hold pressure on the charger. Could I just add some solder to the existing one or should I have the port completely changed out.

[mittcrocket]

Hey! I have an issue where the small part of the motherboard that holds the jack, the one closest to the fan on the opposite side of the HDMI jack, snapped in half. My jack is being held on by solder and a dream. Is this fixable?

[srujan]

Never ever buy a MSI laptop. Their service is like a hell..never ever buy keep my words