The Programat CS6 is the Real Deal

The Programat CS6 is a game-changer for speed and esthetics in the CAD/CAM dental office.

[kbob]

Thanks Dr Klim!!! We are so fortunate to have you wisdom at our fingertips!

[Michealsworldcartoon]

I was deciding between the CS6 and the Speedfire, I was so glad I went with the Speedfire when I upgraded to PrimeScan. It does Zirconia faster and I love using Tessera with a 4 1/2 minute firing time it was such a game changer for me. I keep my CS on hand when I do Zirc in the Speedfire but need it to do a Tessera/emax at the same time.

[EC-ebwu]

If you could only have one furnace, would this be the one? For Zirconium sintering and glazing and staining? And Emax for crystallization and glazing and staining? Thank you so much for your wisdom.

[drderryrogers]

Jim, great work I just changed my Speedfast for a CS6 on your feedback, enjoying it immensely. Do you have any links to order the Meisinger JK02/03 kits downunder in Australia. Is it something that Ivoclar could manage or better to go through US sites

[dannyperrier]

As always, your video is packed with usefull info. Thank you so much. CS6 is in my shopping basket. 😁

[adamchukhman]

Hey Dr.Klim, I love the quality videos you create, thank you. Im just starting to get into cerec myself and was wondering if you recommend getting the cerec speedfire to start or jump straight to the programat cs6?

[andrewhamadi]

Thanks so much for this video. I love it. What are the main differences between the cs6 and the programmat S2

[oxygenius]

where to get this preparation diamonds for occlusal reduction?

[gregors.]

I bought the CS6 recently, and I am bit torn in my opinion on it. It's strange that it does not came with preprogrammed Zircad Prime settings for example, and the cool down phase prior to any new firing is annoying. After listening to your video here I checked the sinter times for Zircad LT, but the manual says any infiltration needs a long cycle and cannot be speed sintered. How do you manage that or do you simply ignore that ?

[florianzumwinkel]

I have the Speedfire and am rather unhappy with it as I am doing mostly e.max restorations. Crystallization times are really long and for some reason the ceramics turn out more grayish compared to the ivoclar shade guide. Anyone else having this issue?
Thinking about switching tothe CS6

[aaronhorsley-teny]

Dr. Klim
Have a prime scan,
Mcxl,
And a speed fire

Question is I want either cs6 or cs2. I plan on keeping my speedfire for katana (I use this mostly when doing zirconia) and the other for Emax. I’ve come to the conclusion that Emax is not replaceable with the dud celtra duo or the new tessera. I’m leaning towards the cs2 mostly for cost but am I being too short sighted?

[drderryrogers]

Jim, another question, after sintering of Emax or Zirc, what is best program for refinemeent tint at lower time line. Have you found one of the programs is better

[laurenced]

Can I use the normal stain and glaze on my emax for the P1 speed/spray option ~11min, or can I only use the P2 speed/glaze option ~16min? Thanks in advance

[judgemonroe]

I have a question, we recently bought a CS6, i used it with the Zircad Multi A2 in normal sinter program, not speed sintering, but it came out as B2-B3, do you have an idea why it's too bright?
Thank you for your videos!