CR10S Pro v2 Extruder Gear Clog Fix

preview_player
Показать описание
Extruder gear kept clogging. So I've done some investigation and how to prevent it.

I've also reduced retraction speed to 35mm/s and distance to 3mm for the meantime as I wait for new fittings to arrive and continue printing.
  1. webslinger2011
  2. Extruder clog
  3. Extruder clog fix
  4. Extruder gear clog
  5. extruder clogged
  6. extruder clogs during print
Рекомендации по теме
Creality CR10S Pro 0:16:35

Creality CR10S Pro - Installing Inductive Level Sensor and fixing sloppy extruder gear!

Dual Drive Gear 0:09:21

Dual Drive Gear Extruder Upgrade + E Steps on Creality Ender 3

Dual Gears Extruder 0:07:35

Dual Gears Extruder kit and Extension cable for Creality CR10s

CR10S Pro v2 0:13:39

CR10S Pro v2 Extruder Gear Clog Fix

How to Install 0:02:34

How to Install Genuine Bondtech Dual Gear Extruder Ender-3 (Upgrades)

Service tutorial CR 0:01:36

Service tutorial CR 10S Pro V2 replace extrusion motor kit

Cr10SPro ... Critical 0:19:25

Cr10SPro ... Critical Fix you need to make ... ASAP, Extruder issue SOLVED!

Creality CR10s pro 0:00:15

Creality CR10s pro V2 failure point! If your extruder squeaks check the bearings in the idle gear!!

How to replace 0:29:40

How to replace extruder arm & extruder feeder | how to upgrade hardware on 3D printer cr10 mini

Creality CR-10S Pro 0:01:16

Creality CR-10S Pro 3D Printer - AUTO MESH BED LEVELING(MATRIX) Tutorial I

CR10s-Pro Extruder Wheel 0:00:07

CR10s-Pro Extruder Wheel / Guide Spinning Groot

Assembly of the 0:13:46

Assembly of the Creality CR-10S Pro V2

CR10 PRO Dual 0:02:44

CR10 PRO Dual Gear Extruder Upgrade MK8 Extruder Double Pulley Direct Aluminum（Right）

Creality CR 10S 0:21:17

Creality CR 10S Micro Swiss Direct Drive Extruder Upgrade

Relocating the CR10S 0:36:34

Relocating the CR10S Pro V2 Filament Sensor to The Direct Drive Extruder Motor.

Best Upgrade for 0:12:18

Best Upgrade for your 3D Printer

Installing a Bondtech 0:22:26

Installing a Bondtech DDX on the CR-10S Pro v2

Micro Swiss Dual 0:16:22

Micro Swiss Dual Gear Direct Drive Upgrade For Ender 3 and CR-10 3D Printers

Unwrapping of Dual 0:00:57

Unwrapping of Dual Gear Aluminum Extrusion Kit for CR10 CR-10S PRO from MAKERLAB ELECTRONICS

CR10S Pro v2 0:00:11

CR10S Pro v2 hissing/breathing sound at hot end

Super Tune Your 0:40:16

Super Tune Your Creality CR10S Pro V2 / Ender 3 V2 Z-Offset To Get Prints with Next to No Stringing

Cr-10 S pro 0:00:07

Cr-10 S pro v2

Creality CR-10S Pro 0:02:16

Creality CR-10S Pro 3D Printer - AUTO MESH BED LEVELING(MATRIX) Tutorial II

Creality Cr10S PRO 0:06:00

Creality Cr10S PRO - Upgrade your Z axis (T8 Anti-Backlash install)

Комментарии
Автор

How else can you deal with the problem? I’m having this issue but it has nothing to do with that bolt in the back!

AcoylteKraven
Автор

Have you guys come up with any issues printing with PETG on the CR10s Pro V2? I've tried so many different settings, but I keep getting a snag in this same area. I've fixed some issues by using Luke's hotend fix, but I'm still getting kinked snags/clogs at the gear. I printed a tapered screw compression fitting that works better than a screwed-together clamp. Just cannot figure it out. I'm thinking this printer has issues printing PETG with normal retraction settings. I've gotten my retraction speed down to 20mm/s on Simplify3D and a 2mm distance. Still have problems.

alrosausa
Автор

Nice video, can put the link for ptfe lock? Thanks

rikimaruazuma
Автор

Such a facepalm video...
So much wrong in the video starting with the disassembling... no need to unscrew the arm...
Just one proper cleaning and PROPER reassembling would had solved the issue...
Or you are still using the PTFE Tubes and fittings that came with the printer (fake capricorn and weak fits)

hogstoothairsoft
join shbcf.ru