Poulan Pro My Favorite to Work on and Own.

Many of you have asked for the Answer so here it is.

[KevinD_x]

I can see the appeal for this mower. There are many cosmetic differences, with relation to the dash & some controls differ, slightly.
I have a McCulloch M14538 (14 HP Intek, 38" cut), Peerless 6 speed, made by Husqvarna in their Orangeburg, South Carolina factory in 2011. It's been in Australia ever since.
I'm the second owner, since the end of 2015. The original owner had it for (less than) it's first 4 years. It's still running as good as it was when it was built, as it should, when well maintained.
That mower would be one of the last made under the (then) Electrolux owned Husqvarna. Husqvarna became independent again in 2006.
They make Poulan, Jonesred, Klippo (now called Husqvarna Klippo), which is why so many parts are interchangeable.

[davidallen]

That's my mower! Every couple of years I've had to spend about $100 on parts to fix one thing or another - and parts are readily available. Just fixed the steering link and put new blades on for about $50 total - it works like brand new. And the nearest equivalent of a new one is over $2, 200 so I feel like I just saved two grand.

[PainterD]

I like my Poulan Pro. I had a Dynamark that I bought used about 25 years and the engine finally got weak so I retired it and got a Poulan, which looked to be constructed about the same as the Dynamark I had. I figured if the Dynamark lasted as long as it did, the poulan should last until I'm in my grave. It seems to be well built and does a great job.

[tracybruring]

i have a pp24va54 poulan pro mower. can you tell me what oil filter to buy?? I can't seem to find that information on line.

[rickgulley]

My popular (hydro) hangs up in forward and reverse. I have to keep pumping the pedal to get it to change direction. Any advice?

[Summerseagle]

I have a 2007 Craftsman lt 2000 is it the same as a Poulan Pro

[pdgutierrez]

Boy you really know the Poulan tractors! thanks

[donaldsmith]

it's located right under seat under battery

[kyleentyson]

How do I switch out the deck height arm? Have you ever done that?

[garystotler]

Greetings,
I have a 2002 model and am trying to replace the stationary clutch idler pulley. It loos like the bolt goes through the frame and has a nut on top. I think it is covered by the steering gear drive assembly. Do I have to take all that out just to replace this pulley?!
(I'll also try your email.)

[wrench]

have a poulan 38 inch, will a 42 inch swap right on? grandfather has an lt1000 42 inch and by memory everything is the same the way it removes.

[vasjoscav]

very good video. and good knowledge, so the heavy duty deck part is different to my prouland tractor, mine is original but your sounds better, how I can get one, where you got it ? and how is the procedure to replace original with a heavy duty deck...sounds as hard task

[Dusty]

I have a popular for it for free from my neighbor but she won’t turn over at all no power nothin changed some things and still nothing what else could it possibly be any suggestions ?

[PapaJohn]

I have the same year mower made by husqvarna. The pin in the deck level arm is bent and I don’t know what to fix. Thanks for the video

[ontarioclements]

My popular pro will click but won’t start I’m trying to fix it what do you recommend

[dawnmyott]

I have a Polan push mower instead of a riding mower

[michaelwray]

How do I disconnect the auto-stop when getting off the seat?

[angiesollman]

Hi, I need help, I’m trying to replace my trans drive belt on my 54” deck 2006 Poulan Pro and I can’t get the tension pulley to budge in order to get the belt on …..

[JP-wcrp]

What is the battery cca? i need one for one that my husband's work has but no battery trying to find what cca it takes.

[GinoCappelli-nwyz]

My cable seems loose lawnmower won’t engage