Launching wheels for inflatable boat with transom - assembly instruction

Assembly instruction for stainless steel foldable launching wheels. Launch wheels are used for inflatable boats with transom and make boats easily transportable by a single person.
Simple installation instructions show how easy it is to set up your boat for more convenient transportation.

Nerūsējošā tērauda konstrukcijas atlokāmo laivas riteņu montāžas instrukcija. Laivu riteņi tiek izmantoti piepūšamām laivām ar tranci un padara laivu viegli pārvadājamu vienam cilvēkam.
Uzstādīšanas instrukcija parāda, cik viegli ir uzstādīt laivas riteņus pašam ērtākai laivas pārvadāšanai.

[paulo]

After watching your video I took a drill and file and created a 4.5cm slot on each of my wheel posts. Now one pin is enough, acting as a hinge and traveling along the slot locking the system in place with either the weight of the boat or the weight of the wheel.

[MatthewFordVictoria]

Why not simplify the process by adding a permanent horizontal bolt to the posts,
then add gate latches to the top and bottom of the transom?

That way, when returning to shore, no more pushing the wheels down with one hand,
while trying to put the pin in place with the other. Instead, just push the wheel down
until it clicks into place!

As for Locking it in place... Gate Latches always come with a hole that's intended for a padlock.
Just Think... No more having to Line Up FOUR Holes so the pin goes through!

My Dad always told me "K.I.S.S." (Keep It Simple Silly!)

Try it... and if you Like it, SHOW EVERYBODY!!!
You'll get lots of Boaters wondering why They didn't think of that!

One more thing... If you're going to leave it at a Dock to go get some Food or Bait,
you can put Padlocks on those latches, so you don't return to find your wheels have been "borrowed".

[дмитрийтрунин-ъл]

Колеса надо крикручивать с мотором, сразу смотреть что бы мотор при повороте незадевал за поднятые колеса.

[Maxcom]

Hi. At the end arent the wheels loose? Another thing, this set brings bolts to fix into boat? ty adv

[fishon]

I dont get the last bit:what is holding the wheels down when you pull the boat forward?

[ibrahimdaas]

Do I have to leave the sealant for two days to cure ? I am using the same brand as you do in the video

[joaopcandeias]

Do you use this small car trailer to transport the inflatable boat? Any tip? I’m think about one for my airdeck 320

[grindle]

hen down theees dont seem to lock in is this correct

[donaldmartin]

The only bad thing is when you do a video lokes that talk explain what you are doing the seal you use amd all that just a fyi