How To Install Keyless Power Door Locks

Parts linked in the description below!

Watch a tutorial as we walk you through the process of installing power door locks and keyless entry to a vehicle that came with manual locks from the factory. This kit allows us to controls all four door locks with the use of a keyless entry fob.

For this specific install, this video applies to Jeep Patriot models for years 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, and 2017. This video also includes door panel disassembly, actuator installation, wiring, and testing.

If you have any questions, leave a comment below! Be sure to like and subscribe!

Other parts seen in this install (Amazon Associate Paid Links):

*Disclosure: As an Amazon Associate I earn from qualifying purchases*

[ProvoBeastAudio]

Parts used linked in the description of the video!

[kevinhendon]

Refreshing to see someone taping up the "Loom" again to make it neat and doing a proper clean install, unlike some rubbish, dodgy installs on YouTube👍👍👍

[jeepguy]

This would be a great upgrade for most basic work trucks as well! I have some trucks that I could do this to! :)

[luvdady]

Yeah a lot of times in the fuse box there's a empty fuse that's hot 🔥 for things like pwr locks fog lights etc... as it's cheaper to build 1 harness
I simply use a add a fuse to either get power or to use a relay for the trigger.
Saves lots of headaches and stress of chasing wires.

[AztecWarrior_]

6:35 What you should have done is get the proper connector ends for that plug. You know since that plug is meant to handle the wiring for the power locks and windows, when the vehicle has the package. So if you ever need to take that door off, you don't have to cut the door locks' wiring.

[nork_ger]

This is so cool! I have a Tercel and I totally want to see if this is possible to do on my ole Cheryl!

[jdmchickkustomz]

This is helping me fig this out, thanks

[leighanneh]

finally got the shot to install this on my 09

[MasrSR]

For those clip style door handles you can actually fully set the clip beforehand and just stab the handle on it will automatically seat itself

[ricardosom]

Hi, thank you for your video, very descriptive step by step.
Let me just ask you, will those actuators work on any car?
I have 94 accord. Thank you.

[bryantwalker]

Excellent video! I would have liked to see how you wired up the lights also but thanks!

[jdmchickkustomz]

I remember those kind of window handles 😂 always lost the clip

[wyattkurth]

So is it possible just to use two for some standard cab trucks?

[jdmchickkustomz]

Okay you're awesome this helped me finish mine on my 99 Eclipse but I was wondering how do you tap into the turn signals to make them work with the lock? That looks like the same one I got online which color would it be does it matter?

[ethanromulus]

im conmfused so what do u plug in into in the car to get power?

[christophercolletti]

I got everything hooked up but my key fobs won’t lock or unlock any ideas why that might be?

[awkwarddude]

Bought a similar kit from a China supplier. Almost the same components. There is a short harness with a blue plastic disk around an LED, the harness plugs into the side of the controller. Bench hooked up the kit. No batteries in the remotes. Had a c2032 that worked. Got the main servo to work. The blue LED sometimes flashes on lock but not always. Not sure where it needs to be mounted or why. The instructions were in French. They got me an English color code translation sheet finally. Checked the voltage on the pink/black wire, only 2.5v on lock, 1.5 on unlock. Not enough to flash one side of the turn signal lights. Not necessary but would be nice to figure out how to hook it up. My 87 Volvo 740 already has power door and trunk lock servos, manual only with the key in the driver's door tumbler. Only need the main servo on the driver's door lock rod to lock/unlock it remotely. My car has power windows so I hope I won't have a clearance issue for the single servo. I'll mount the controller under the instrument panel. Should be a simple install. I don't understand the need in the instruction sheet for the "learning code" sequence or what "pins" it's talking about. 🤷‍♂Thanks for the video! Showed me I'm on the right track.

[anthonydipippo]

Whats required for central door lock/ unlock swich, i know this is optional?
Can the lock lever button open them as well without the extra button?
Thanks for the video!

[toptierassassin]

On wires 5 and 6 what does it mean by “connect with manual”?

[KVI]

clean job, what you should have replaced all the wires that came with actuators and the control unit with copper wires, as the wires this system came with are low quality aluminum wires and will decade soon.