iPhone 6s Plus home button - Touch ID replacement

Step-by-Step repair guide how to disassembly and replace broken Touch ID sensor on iPhone 6s Plus
Buy new home button and screwdrivers on Amazon:

Buy on ALIEXPRESS:

FOLLOW ME:

**** DISCLAIMER ****
This video intended for general information only. We will not accept any liability for damage or injury caused while following this guide. Any reliance you place on such information is therefore strictly at your own risk. This video description and commentaries contains affiliate links, which means that if you click on one of the product links, I could receive a small commission.

**** AFFILIATE PROGRAMM ****

#howfixit #howtofix #fix #fixiphone #repair

[howfixit]

***Links to screwdrivers and parts in the description under the video*
****Touch ID function will work only with the original button. Any other button will work as a return to the main screen. Also this video is useful to those who clean the button from sticking*

[matthewsmart]

This is NOT a touch ID fix. This is only a home button fix. You can not fix touch ID unless you are apple as it is programmed to sync with the motherboard.

[sloopycat]

Hi I have changed the screen on my iPhone 6 and need to swap over my home button to my new black screen, my old screen was white, can I swap the bottom part of my old white home button to my new black screen other if I got to do both parts it will be a old white home button on my new black screen, I hope that makes sense. Also can I replace the 3 rectangular connectors on the flex ribbon on my iPhone 5c screen because they have come apart from my screen and obviously I can't power on my screen now. Great video Thankyou.

[Forensic]

Hi thanks for such a clear video which clearly shows each part of the ribbon. I was stuck not understanding that my speaker had parts of the old phone on it and you clearly showed how it was suppose to look so I took the metal rubber piece off that was still attached!

[sethreign]

This doesn't restore touch id since the home button is paired with the phones they were manufacturered with. To restore touch id you would need the button from the original phone & solder that to a new flex cable from a different home button. Afaik that's the only way you can restore touch id functionality.

[irocvert]

HI! I have an old iPhone 6S lying around and thought about fixing it for music use. The screen was cracked and the home button did nothing so I sent away for parts and changed them. The problem is that the home button is still unresponsive. For a bit I thought the extension ribbon cable might be bad but I realized that got changed with the new screen. I'm thinking it must be the motherboard. Any suggestions?

[tubularguynine]

I have an iPhone 6 that I replaced the LCD and Screen on. The replacement screen came with the home button already in it, and the touch ID doesn't work. Can I put my original home button in the new screen and get the touch ID work again?

[motukurisainithin]

Sir iam using iphone 6 plus but finger sensor is not working should i need to replace it??? How does it costs for replacing the finger sensor???

[hyunjinlee]

It did not work and my screen is now broken and forgot a part about taking out the screw at the bottom part!Good work at least!

[dejvid]

Is home button on iphone 6s plus pushable? Or just touch?

[nareshkalpagiri]

after changing finger prient it is showing unable to access finger print in this ipone showing what to do

[lokeshcandy]

Make a video on changing the home button or fingerprint strip which is back of the disply.

[adrianchilel]

How to change iPhone 6s Plus flex cable

[Atrax]

It is homebutton from ths Phone no new

[merchination]

iPhone 6s doesn’t have a lightning port.

[NERO-ezmn]

will the home button work even with a different motherboard?

[gaelsanday]

Fingerprint notworking, so now, I change homebuton, for working Already sir?

[Forensic]

Hi thanks for such a clear video which clearly shows each part of the ribbon. I was stuck not understanding that my speaker had parts of the old phone on it and you clearly showed how it was suppose to look so I took the metal rubber piece off that was still attached!