Installing Door Hardware - RV Rebuild (Part 15)

**If you like the content please thumbs up & subscribe! :)
.
.
.
Class A Living Videos In Order:
.
RV Teardown & Rebuild Playlist:
.
Join this channel to get access to perks:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
LITHIUM BATTERIES!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Chunky]

Boondocking MadMax style. Gonna look epic. 👌👊

[grindz]

Dude this thing looks so sick! Total post apocalyptic beast

[CozyLivingMachine]

Looking great! Tight tolerances for the doors too. Talk about skill!

[texastruckjunky]

The doors came out awesome 😎 Great job.

[vaningersoll]

if someone tries to break in that tank will need a torch lol

[Spankytrucker]

Man, Patches is gonna look awesome. My favorite part is the deck area. You can be chilling in the rest area grilling. Awesome job looks sick👍✌️🇺🇸🇺🇸

[theteagues]

Hi Nathan.
No matter what holesaw you buy, you will nearly always snap the bit if you allow the large bit to jump into the material after the pilot bit breaks through. You have to use finesse drilling the pilot and also starting, and finishing, the main hole..
In my day, once your journeyman provided the appropriate "feedback" for breaking a couple of his bits, most apprentices learned pretty quick.
It might be a lot easier if you clamped / stabilized the door and found a way of bracing your shoulder.
If you use a bit of oil and take it easy, decent holesaws will last generations.. I still have about two dozen from my time as an electrician though the '70s & '80s.
Best regards, Dennis

[mattharvey]

square edges .... wind to round has a 1 ton made for strong structure....cheers

[clarkesexplorations]

A rotating roof top water cannon, would top off this beast.

[adas]

Hi Nathan! Just noticed that you used the fasteners from the lock kits to install, those are really meant for installing into wood. I would recommend getting some machine screw fasteners or self tapping metal screws for this application. The included screws are a bit soft and might break for this application.
BTW Great work! Really coming together!

[johnhbuiltnotbought]

Nice one looking good.stay safe 👍👍👍👍👍👍👍

[trevorwilley]

So exciting to see it coming together! Geat job!

[justin-hwyz]

Looks awesome Can’t wait to see the rest of the build

[thegrumchronicles]

Hope you sandblast and prime/paint, that would ensure permanent adhesion. .

[jenniferpayne]

Cant wait until that fun boondocking brother kip up good wook

[TEN-vemp]

Probably heat treated. On the bright side, it won't warp have to be replaced.

[Sparky-joystick.]

The door looks secured. No one geting in 3 lock not bad idea

[andyisthebestest]

How about pre drilling the pilot hole before using the cricular bit. I do this when coring holes through concrete/brick walls. The bit inside the circular bit is really just for a guide, to keep it straight.

[flowersme]

Was wondering what your doing with the back half of rv I tried going back some but did catch any videos talking about it

[aleksandrcibor]

When you hoping to have it driving and possible night out.