Manufacturing Process of Hammer In Small Indian Factory || Forging of Hammer

Manufacturing Process of Hammer In Small Indian Factory || Forging of Hammer
#forging #hammer #blacksmith #howtomake

[davidh]

Somewhere else in pakistan someone is making rebar out of knackered hammers.

[nance]

Some processes shown over and over and over, yet the grinding of the head and claw not shown at all.

[LanoSilva-bvnd]

Esses produtos fabricados aí vem pro Brasil ou não e só suas cidades mesmo

[honkie]

Rebar is probably the cheapest grade of steel available. There is no blending of steels to get a certain characteristic or sampling of raw material to arrive at a desired end result. You have hammer heads that may split from being brittle or peen outward from being too soft.

[rkm]

Hammers made from scrap metal are always scrap

[tima]

That’s how my great great grandfather made stuff in the late 1800s

[abhisheksharma]

Bhai company ki address to do jo ki purches kar saku

[greggminkoff]

Rebar is made from scrap steel. There is no heat treating. It is not forged. It is a low carbon flexible steel made from scrap.

To make a quality hammer, the steel should be: high carbon, heat treated and then forged.

[davidlagle]

You can double your production speed if the second forging dropped to the far guy. He could load the second run while the first guy feeds a new one at the same time.

[jamesbond-dbfd]

Ladies and gentlemen welcome to TEMU sweat workshop 😅

[dennisyoung]

You’d think they’d toss the finished forgings in brine?

[TruthIsLove.]

I would be interested in knowing how much these workers are getting per day, and whether or not it's even more than a dollar? And where I could send a donation to these workers individually to make up for the sin of taking advantage of the eastern worlds current position in working this way for the western worlds greed.

[orionoutdoorsandworkshop]

it must be so comfortable to work with sandals on. 5:29. every one of these videos show how these people have to work in unsafe environments to feed themselves and their families. no insurance, no retirement, just a life of trying not to get hurt/maimed every day. pitiful.
in the u.s the end of the line for junk steel like this IS rebar.

[MmmHuggles]

Every hammer is made using a hammer. There is an unbroken line of hammers dating back to when the first human beat metal into submission with a rock, the first hammer.

[markjohnson]

Cripes. Nine cycles of removing the flashing and punching the center hole.

[yuriytopolevskiy]

Все делается из арматуры - от сверел до молотков

[prasadrajadhyaksha]

दो मिनट का व्हिडिओ सात मिनिट का बनाया.

[madasamyramasamy]

This is not in india....selection of raw material is not good....

[paulmark]

5:10 this can go wrong in so many ways.

[markjohnson]

1000% agreed. Too many repeated views.