Control your Winch VIA TRANSMITTER!!

I take a look at the FlySky GT5 off of Amazon for my RGT EX86010 to see if I can finally control my Warn winch with my rc controller/transmitter/remote

These are affiliate links below and we get paid a small percentage if used at no cost to you.

FlySky GT5:

Winch Controller Wire:

Warn Winch:

INJORA BEADLCOK WHEELS AND TIRES:

RC CENTER CAPS:

SPARE TIRE COVER:

Xtronic Soldering Station:

BUMPER VIDEO

STINGER BUMPER:

REAR BUMPER:

RGT CRAWLER

HITEC RDX1 MINI

#rgt #injora #flysky

5-30-22

[rcjono]

Mate, thank you so much for this straight to the point, no time wasted video. I can now move on buying a winch as I have just got an FSGT5 and was wondering how I will control a winch with my transmitter. Big like big sub!!! Keep it up mate! Regards, Jono

[Bonald]

Thank you for the video. I have a gt5 and had the same issue with the winch control needing to be reversed. Your video helped me.

[seanwaight]

Thank you this has made my life so much easier

[robpracht]

Nice.
Try connecting it to channel 5 or 6
Than with the turn knob you can control the speed of the winch.
Now you have more control when winching and its super realistic .

[RCRoads]

Thanks for sharing this information. Great job! 👍

[sylvainparadis]

Very useful thank you.
Sylvain from Montréal

[soemardi]

I think you have more power with 1040 esc as winch module. It have dragbrake and more voltage. Just pull the red wire to receiver. And power the 1040 to battery you will be good

[slothsquatch]

I got me a Surpass 6 channel transmitter. I've had it a few years now.

[klutch]

Glad I found this video. My gt5 will be here Friday and I'll finally have my build up and running and been wondering what all I could use the other channels for. Do you know a different link for the winch you used because the one you had is expired now or will this work with any winch?

[БиЭмГрупп-цй]

Hello. Tell me, how did I clean the glasses on the wrangler's body?

[Hughginvaini]

Soon as my winch gets power it starts spooling. Any ideas. ?

[magnumpi]

Im trying to install it but before i powered it on i noticed the jst connector wires connected red wiee to black wireso i did not connect it fearing smoking the receiver and winch and controller. Anybody else have the same cross connected jst wires?

[AhmedAli-mywe]

This winch so whack I bought a couple days ago. It worked one time and it stopped working.😂

[DSMattitude]

If you had a Toyota instead of a Jeep you wouldnt need 😝

[inspireonex]

2:24 no. Thats an RC switch. Not a receiver. You might consider learning about what you're installing before posting a tutorial