BUYERS GUIDE: Watch this before Buying the Backhoe!! [BH77] [Kubota L-Series]

Today I wanted to make a video discussing the pros and cons of purchasing the BH77 Backhoe with your Kubota L2501, L3301, or L3901. This is a costly implement at $9500. Is it worth it???

This video is intended for people who are in the process of buying a tractor and debating on the backhoe attachment or people who already have the tractor and want to add the backhoe now.

If you are watching this and have your own experiences with the BH77 backhoe, please leave a comment with your opinion! I would like this video to provide useful information to potential buyer!

I hope this video helps, as always please comment, like, and subscribe! Check out my other videos, thanks for watching!!

[braddow]

I bought a bh77 last year with my new LX3310 tractor and paid 8000 for it and around 850 for the subframe! This was my first tractor and had 0 experience with tractors before this! The Lx is about 400 pounds lighter than your L and it really does pull me around when I’m pulling hard! You can do a lot of work with these backhoes but they do have a short reach when you compare them to a mini x! In my area up here in the northwest I have a thin layer of top soil and then I hit clay, river type rock, hard sandstone that you have to scrape away at it but the bh77 will go through it all. My neighbor has a Large JD backhoe and he has trouble digging through this same stuff but he does move more dirt then I do! I should tell you Kody that your channel is one of my go to channels that I used to determine what tractor I should buy for my 3 acre property!

[phattdaddy]

I have the BH77 and it's on an L2800...yes it beats a shovel!
You did good on the pros and cons... you have obviously used yours.
Removal of tree roots/sumps/trenching it works great. No comparison to a mini.
I dislike the low ground clearance (#1 beef) ...live in central VA... hilly.
Well-built/tough has limiter so when you over tax its limits hydraulics stop...this is a plus.
You have to use/appreciate the equipment for what it is. I am satisfied with mine...8 years and going.
Keep safety lock on boom and pin in place for boom swing when traveling. Almost overturned mine when a low tree branch caught between joy sticks, boom started swinging, extending out along with the dipper and was on 2 wheels before I shut the engine off and dropped the bucket...heart raced and clean underwear was needed.
Great overview!

[utubota]

I have the BH77 on the L2501. I converted to a tilt deck trailer to avoid the pivot pin dragging on the pavement. I added a thumb that I made myself, with hydraulics. I did not want a fixed thumb, and I did not want to spend thousands on a backhoe. It works great. I made a bulkhead for the rear hydraulics (again home made), and relocated the power beyond fitting. This solved the hydraulic line problem when the backhoe is not attached. You are correct; the backhoe will raise the rear of the tractor, and the backhoe will easily move the tractor around, even with the outriggers down. I like the backhoe, and use it and the thumb to move boulders. I have the standard 16" bucket, and considered getting a trenching bucket. Others had said that the trenching bucket clogs and quickly becomes worthless. The swing function is pretty weak, but the other hydraulics seem to work as necessary. The curl is the strongest, and the dipper next. My dealer would love to buy my backhoe and frame. Apparently demand is exceeding supply.

[jamisoncurtis]

For 7 going on 8 years having a 1025r with a backhoe. The lil machine has done a good job for me so far. For bigger jobs got dads 1974 JD 410 backhoe. Been plenty of times the smaller backhoe was ideal an others where dads full size filled the bill.

[Patty-qhlm]

I have the B2650 with that backhoe and I love it! I use it to lift things in and out of my truck, like a generator. I've dug trenches and removing huge tree stumps by spinning them out of the hole when they are too heavy to pick up. I've removed rocks and buried huge rocks. I use it to hold up logs for cutting with the thumb and it can pull you out of places if you get stuck and the stabilizers can lift up the rear for adding tire chains. I only take it off for snowplowing because it is a bit heavy and takes away steering traction on ice but I do drive more responsibly without it because it's my security blanket if I get stuck in a ditch. I love this thing!!!

[brentcornell]

I have one, be sure you have a great service center. My BH77 had faulty oil pump from factory. Kubota gave me 1 year additional warranty for my problems. Compare cost to purchase over cost of renting, you can rent a lot for $10, 000 .00 and won't have repair bills if something breaks. I have used this to remove over 100 stumps, between 10 to 24 inches, and dig drain field. Not much use, 4 weeks of work but getting good use from it. Lines leaked, pump failure, lost time because repair can only be done with it attached to tractor, so your without tractor and backhoe for duration of repairs. This adds hours to your tractor and backhoe, repairs require testing and use of this equipment so trust your service center.

[profdave]

Good review but I think it’s important to remember that tractor backhoes are “compromise” devices. The negative items are quite common with any tractor and backhoe attachment, with some variation of course between brands and backhoe models. I have a Kubota L4060 cab with the BH92 backhoe. It has a few minor compromises but even though it was really expensive, I have used it not only for me, but also to help others, and I have absolutely no regrets. I’m not sure if the BH77 has a hydraulic thumb option but I have the hydraulic version on my BH92. It too was expensive but having had it now for 2 years, I don’t know what I’d do without it!

[markh]

He mentioned the hydraulic line bumping into the 3 point link when backhoe is off. I wrapped mine around the roll bar.

[gerlandkent]

[thank, you for you're video.👍 just, bought a case ck. 530 diesel Backhoe. never operated a Backhoe ever. I've. always wanted one. now I've. got one. now, I just need to start learning how to operate it.]👍

[circuitbreaker]

I have the BH77 on my B2650. It works great for me and I use it for everything. I made a hydraulic thumb to replace the mech. one. I even used it to lift tree poles so I could cut with the saw at working height. My only issue is that having a cab I cannot reach the loader control to move it. So i have to get in the cab all the time to move it. Ok when i have helper that can move it for me so i can stay on the hoe. Have overcome the dragging of the tractor. Don't dig so deep. Take smaller depth cuts. Not a issue with the rocks.

[markcole]

I have a 3 point back hoe on my Kubota 3902! Much older kubota back hoe but got it for a good price ( needed some repair) I mostly use it for removing Stumps and I have a trench to dig at some point …. It’s convenient having a 3 point design and I also use it with my quick attach! Probably not the best set up but I can usually get it hooked up in 10 minutes or less! I’ll probably add some bracing from the rear axle housing to the loader frame this summer before I use it anymore! Just some added support!
Good video! I agree …there’s always draw backs with most attachments

[lcee]

Nice accurate description of the backhoe. I have the B77 (love it!) on a B2650. I’m not a professional equipment operator by no means but Im guessing all backhoes will move, lift, push/pull a tractor around. Most of the time it’s operating technique that helps keep the tractor planted… still learning!
You might check on getting the “B” series rotating seat mount for your tractor. (or the whole seat) it might be a bolt on that would give you more room.
I’m no 6’ plus but I have plenty of floor space.
For those that don’t like turning the seat around and around, yes it can be a pain!
But when digging a trench line, you don’t have to turn the seat. Use the backhoe to move the tractor. (Only on level ground by the way) Lift the FEL off the ground, raise outriggers up 3-5” off ground. Open the bucket, pull dipper in about 1/2-3/4 way, lower boom till the bucket is against ground then extend the dipper which will push the tractor forward. (Because the backhoe operates in an arc, you might lift the rear tires off the ground ) Of course you will want steer the tractor as you move.
Then set your FEL, outriggers and start digging where you left off.
Bonus: if y’all haven’t figured it out already, you can move the rear of the tractor side to side without getting off too. 🚜

[georgespangler]

I have the L35 Kubota with BT900 hoe and 720 loader, it's a great machine, almost 12 foot reach and all the power I've needed.

[Sventy]

Got a bx23s. That thing gets moved around pretty easily. It's my first machine but I love it. Honestly the swivel seat gets annoying. I sometimes wish it had two seats.

[edenfieldjared]

thanks for your time and honesty. This video was helpful

[dr.thunder]

One will be delivered to me in a couple days, I'm excited.

[rquinsey]

Thanx for your opinion video. I was wonder some of the issues about losing ground clearance, and since I just purchased the same set-up today, I will know it wasn't only me who thought that; but, I was reassured by what you said on the the positive sides of the equipment. Best to you - keep up the straight forward videos.

[keithrayeski]

Some comparison observations; I do not own a kubota. I have a 2022 Kioti CX 2510. The subframe on the Kioti is up higher…it runs along the actual frame rails of the tractor. I also have a grapple which adds a third function set of hydraulic connections that are lower but, if you are talking just backhoe, clearances are not an issue. Also, the operator station has the separate seat but the station is very generous and spacious so the seat is the benefit of not having to being lifted and swiveling every time you move a few feet to adjust your dig. Now, back to clearance…yes, care does have to be exercised when any change of elevation is in your travel path. If you try to go up or down with any measurable change…the backhoe frame at can drag in that direction. Personally, I could not imagine buying a tractor without a backhoe!

[brentcornell]

I got BH77 Backhoe and didn't even get 25 hours on before seals blew out! Lost all hydraulic oil.Then a crack in case iron hydraulic pump. Yes, backhoe works but I didn't even make 2 payments on mine, could not get replacement, lost a month of work waiting for parts and repairs. It's been over a year and still don't have pads for the concrete pads for outriggers. What you may not know is the equipment pick up and delivery is not warranty. KUBOTA does not offer anything for your troubles.

[marcsally]

Good job on the video. Interesting, in one of your reply messages, that you now would rather have spent the money on a mini X.