Hikvision NVR Setup with PoE Switch

In this video, I show how to setup a Hikvision NVR with an IP camera connected to a PoE switch.

[virtvirt]

even if i am using hikvision for 7 years now, never had a setup with nvr without poe ports, but today I had to set up one with poe switch, and I found this video confirming my theory about the architecture. thank you

[pranaytammireddy]

It is one of the clear and great explanation video. Instead of directly jumping into NVR ip range from laptop. You had clearly explained from laptop to camera first and from camera to NVR next. So I would assume now that the extra ip added in laptop is not required at the end?


Also please tell me a if there is an video already for the router ip address range config already?

[ivanclaros]

Very usefull. One question. Can I use a different brand POE switch with my hikvision ip cameras. The guy at the shop told me is not a good idea. But, I see you are using a NETGEAR Switch and a hikvision ip camera. Tell me please.

[marceloaguilera]

Thanks for the video! Question. Can I expand the number of cameras on a 4-channel Hikvision NVR by connecting 4 extra cameras using a PoE switch?

[banthomas]

thk a lots for sharing, may l asking how to decide a site wanna use poe nvr/non poe nvr+poe switch.

[nptsgqr]

What is the benefit of connecting the camera directly to the switch or directly to a router v.s. the POE switch on the NVR? I am not understanding this.

[toutou]

Thanks. .so how many camera can we see in this nvr via poe switch

[jorisr]

Thanks for the great video. I have a question though. In SADP I see the camera online with an IP in a different range (as you stated). I add the IP in the correct range, but when I ping the camera I get a constant timeout.

It is an older camera (DS-2CD2332-I), could it be a problem with the camera hardware?

[DriesCauwelier]

Thanks for the heads up! How to make that specific camera then recording to the nvr? Does it do that automatically once it is connected in the NVR settings? I have a similar setup. No camera is directly connected to the NVR. But none of the cameras are recording on the NVR... Can you help? thx!

[migo]

Thank you very much! you deserve a subscribe and like..

All this time when I see D2, D3, D4.. etc and I don't have the option to delete them, I never knew they were the ports that the NVR use as internal IPv4 addresses lol.. Thanks.

[boyachi]

Hi Thank you video, I've question Can I add TPLink to this nvr, I'm interested envr form Hikvision to much.

[jonathandavinji]

Good good good this is one of the best video.kindly if you are having for the door access control system, may i have link.

[cihadkap]

what is the benefit of using a Poe Switch instead of using everything on the NVR?

[shoebelias]

hi, thanks for your video. But i saw one of the point you were putting the camera password. what happened, if I don't know or forgot the password. I can't find any video that shows how to reset camera password for hikvision DS-2CD3345-I? can you please help?

[vinodkumar-vekw]

Donb buy hikvition products actually product quality is best to compared to other brand but warranty is very bad its warst service