DHCP Relay - Mikrotik

#mtcna #mikrotik #dhcpserver

Explore DHCP Relay on MikroTik routers in this concise video guide. Learn how to configure and optimize DHCP relay settings to efficiently manage IP address allocation and network communication, ensuring seamless connectivity in your network infrastructure.

Check more videos on my channel

Connect with Wilmer Almazan

mikrotik
routeros 7
ospf
mtcna
mtcre
cybersecurity
routing
cloud computing
virtualization
switching
network automation

[ronneldue]

no doubt that you are the best in what you do.

[alimibrahem]

so elegent Mr Wilmer...! i will be very Greatful if you add a video that explain the default firewall rules that came with the router.

[chrisyoung]

so if I wanted to have multiple scopes (subnets with devices requesting DHCP addresses) I would create a DHCP server for each one? Basically I would repeat steps 1-3 on the server for each subnet?

[mrnijai]

If we want to do on layer 3 environment. Doest the interface on the dhcp-relay must be set to the bridge?

[elcanol]

I am trying to do relay to a single central dhcp server from multiple POPs all with mikrotik routers serving GPON customers. I see that on the server you can define only one IP for one relay. Would this setup be posible to get multiple relays to a single server? Or would I have to create multiple server, but that defeats the purpose of a single server... The whole system is running OSPF/MPLS routed, and the dhcp server is running a 100.64.x.x/10 network for carrier grade NAT. We are currently doing central dhcp server by running multiple VPLS tunnels to the central dhcp server bridge, from the POPs dhcp client's side vlans. It works, but the problem is that when a customer requests a resource that is available locally at the pop, it will travel to the edge router with dhcp, and go back outside the VPLS tunnel to the POP, causing double traffic and double latency. We want to run relay with option set 82 to determine the originating POP and assign a local gateway at the POP for the customer, so that local POP resources can be found at the local routing table. Thanks!

[yuniornugroho]

Is it Possible if DHCP Server is Windows Server ?