New BOV For The EG Hatch! BATTLE OF THE FAKE BLOW OFF VALVES!

IM BACK!! I'm stoked to be back, it is currently half an hour before this goes live and I am just piecing my life together after last night (New Years) so I'm sorry that this video has the old outro and stuff after I said id get a new one. I'm working on it don't worry, just not today 😂 Anyways enjoy the video and let me know what you think the issue was with this stupid wish part!!

THE COMMITTED CREW STORE:

SEND STUFF HERE📬
PO Box 57359 Coquitlam, BC, V3K 0C9

FOLLOW ME HERE⬇️

CURRENT GEAR:

Music:

[stewartsuv]

Put a softer spring in it that will open on less pressure

[Bikklo]

Would it be possible to swap out the spring from the original valve into the body of the new valve? Maybe worth a shot. Glad to see you back Robbie!

[paulchancellor]

For some reason I like the way Robbie says "hey buddy"

[williamwells]

At like 8.08 they almost got rear ended by a gmc truck

[Foxslayer]

The OBD Port has always power, so if you let normal OBD scanners in the port it will drain the battery. Look out for a scanner with an on/off switch. or power off function

[LeeMr]

Happy new year from the Netherlands Robbie! Let's make 2019 a blast!

[brandnvazquz]

Welcome back. We missed you #NOTIFICATIONSQUAD hope you enjoyed your vacation 🔥

[nicke]

Pressure = Force/Area. If you increase the diameter, and have the same spring force, the pressure it takes to operate will decrease. You are likely trying to go the wrong way and the reason you lost boost pressure is because it is constantly leaking. You probably need a stiffer spring.

[jwrecka]

That original bov sounds so good! Just like a greedy type s. The best sounding bov ever made. I wish they still made them

[jaspercammaer]

Quick tip on how pressure interacts with surfaces. The force (F) applied to a surface with area (A) by a difference in pressure (p) equals: F=p*A. This means that in contrary to what you are saying, the blue blowoff valve with the larger diameter should have a higher force acting on the spring thus opening more easily.

[brandonreid]

Man I'll never forget the Toyota Aristo with 2jz and dual HKS BOVs I drove at 18yrs old it was unreal you barely touch the gas and stustustustu! Soo good hahah

[itsdakun]

welcome back robbie! happy new years :) staying committed 2019, this year im gonna make sure I get to move to LA

[michaelking]

Welcome back Robbie! Glad you had a great time with your family on the holiday season. Looking forward to your videos.

[abdichow]

👍 if this YouTube channel is just STRAIGHT 🔥🔥🔥🔥🔥🔥

[garrettjew]

Rob, thank you a million. I have an em2 which I have been building based on your videos. Just ant to say, thank you!

[jonathonabel]

Yooo glad you're back! Starting the year off right.

[bubbalicious]

My 2 cents, probably wrong but hey, the nut and screw on top of most BOVs or at least the ones I have experience with adjusts the pretension, which is what makes it close once vented, so having it so loose is why it's leaking. As for why it's not opening, as others have mentioned the internal spring may be too heavy for the boost you're pushing or even just gummed up in there, worst case you may have an existing boost leak in your piping which allows the pressurized air to leak there rather than through the BOV.

[mprism]

That old blow off sounds so good I love it

[Siiiiiikk]

Ayee back at it again wit the fire content

[vithursan.b]

Blessing us with a civic video to start off the year! Happy New Year my dudee