Holley Digital Dash Tech Series Episode 1

Subscribe now to make sure you don't miss any of our new products!

HOLLEY ON SOCIAL:

PURCHASE:

[threepedals]

We installed one of these dashes in the Car Craft Malibu and it is AMAZING! The display is so crisp, even in direct sunlight. We're going to configure a switch for the line lock before LS Fest!

[the_dre_wayy]

So what all can i see and do with my Holley super sniper? Will that even work?

[fastjp]

Holley are you going to ever make a dash bezel for the 12" for the square body GM trucks like you have for the 7"? I know it will be tight but it should fit. I would definitely buy one please, thanks.

[dylanhager]

Can you connect your flashers to the 7 inch?

[jaxjax]

I don’t understand why doesn’t comes with Trasmission temperature? I just buy the holley terminator x max

[mrodsf]

Do these dashes have a provision for PRNDL?

[ramirossify]

Will the dash work if your running an AEM or MOTec EMS/CPU?

[Letsgobrandon-hw]

Can you do a video on how to add a fuel gauge? My friend has the 7in and needs help program part.

[PANTYEATR]

i still have questions...i want to install the 12" in my 95 mustang. i just want it to function as a dash as if the car came that way. can this dash read sensor outputs universally? can the screen be configured to be white faced in the day and black faced at night (similar to the Autometer phantom II gauges)? lastly what program is used to make custom backgrounds and gauges for this unit? thanks in advance

[LeeKazee-pfvv]

how do you add a fuel level guage instead of fuel pressure

[thomaslammert]

I have a 7" digital dash that the GPS speedometer quit working on after I updated the firmware to V6 203, how do I get a fix for this problem?

[autoconversion]

hi, can these dash work with standerd GM OBD2 connector. [ls E38 ECM] Thanks

[Dannymclovin]

Can the speed sensor be wired in to this based on pulses per mile signal?

[cliftonhaskell]

I have a sniper 2300 been running it for about a year had fuel pump go out on me put a new fuel pump on blew a couple few days and then it quit running and says searching for ECU or can’t find NCU something like that and I check the fuses and all that kind of stuff in the sand all the good or should I start looking next it was running fine and then just like went to give it to gas to cross the highway and it just died and it started back up then it did it again help me if you can please

[brandondavis]

Do you all sell a direct fit dash kit for 1985 grand national??I'm interested in buying the 12.3

[timothybenton]

I have the terminator X and the 7” dash. How do I setup the odometer. I have the vehicle speed from the speed sensor and we tested the accuracy of that on the dyno and it’s pretty close. But I’m not sure how to get an odometer.

[jamesdriscoll]

i like this to plug into my 09 cts-v to look at iat2 and other levels and the use it in my camaro for my commander 🤘🏼

[kyleshipley]

hey. i have the super sniper 1250 i am purchasing the 6.86 pro dash display. my 1250 comes with a hand held touch screen display. Will I able able to use both of them? I would like to mount both the 6.86 display as well as my small touch screen display in the truck. Thanks

[robmotown]

Didn’t he just say the the old and new are the same aside from resolution of the display!!

[onlyontv]

Can it also display fuel level as well? (Not pressure but how full the rank is)