HOW TO KNOW IF A CAR JUMPED TIMING CHAIN TIMING BELT. SYMPTOMS JUMPED TIMING

HOW TO KNOW IF A CAR JUMPED TIMING CHAIN TIMING BELT. SYMPTOMS JUMPED TIMING

How to know if a car jumped timing chain without taking the engine apart? You cannot tell 100 percent if a car jumped timing chain but 90 percent of the time you can by looking at this symptoms. Sometimes cars will jump timing chain or belt and the engine will be trashed, other times they will jump only 1 or 2 teeth and the engine might be ok but you will need to reset the timing.

Our Most Popular Videos:

♦♦♦ Cameras & Gear Used For This Video ♦♦♦

•Cameras

•Tripod

•Microphone

•Light

•Comuter for editting

♦♦♦ Other Equipment and Gear that I use ♦♦♦

•Camera

•Extra Computer For Editting

► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!

This is not a sponsored video. Everything is purchased by us!

The video is meant for entertainment purposes only. Do not Attempt!

AMAZON ASSOCIATES DISCLOSURE

*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

[AutoRepairGuys]

⛐ Check out our Garage to see what tools we use and recommend:

⛐ Subscribe and hit the notification bell by the subscribe button for new videos:

[rjsjd]

Rev up your ENGINES! ✋ WAIT wrong channel!

[baconator]

This video is a really good example of how to hear the difference of an "in time" vs "out of time" engine, when the timing isn't so off that piston/valve contact occurs.

[Sheisty]

He was talking over the car sounds lol

[wrotedog]

This is what is happening to my 1999 k2500 7.4 Chevy suburban. Thanks for this video... Also it was low on power as well.

[carolinawestern]

As a mechanic, I'll explain it in more simpler terms! A engine that's jumped time, but still runs, needs to be diagnosed as to whether it's jumped a few teeth on one or the other of its timing sprockets. In which case can't be repaired but only replaced instead. Or has simply gotten it's timing advance or derate out of adjustment at its distributor, which is a easy fix. The most common signs are.
Hard starting with quick, uneven, upward spiking when cranking over.
Unsteady idle, or misfire, with excessive engine vibration. Intermittent but steady popping noise at the exhaust pipe.
Noticeable loss of power and decrease of fuel mileage.
Excessive valve tick or chatter, especially during acceleration.
Changing a timing set can be difficult and labor intensive, and should only be attempted by someone properly qualified! Several factors go into getting the engine set precisely back into its proper timing position. There is no latitude for this because if the time settling is positioned just one or two teeth incorrectly, it can cause further internal damage, in just a matter of a few seconds!

[hamzahalhumaidawi]

Very good explanation this is the write video I have seen

[georgekurgansky]

Blimey, I'm so glad you made this video! Thank you 🥳. My timing is all dandy 😁

[MrAhsanayyaz]

Nice video 👍👍
This video helped me to diagnose my timing chain
Facing same issues

[dennisgoe]

Will it jump from overheating and stall?

[leonelmartinez]

i just realized you are the same from world mechanics 😲

[joyesaladino]

It would help me if you could clarify the difference between the 2 cars. The first had a glottal sound around 2:36. The second car had a sound that seemed equally unhealthy around 5:06, but it was not during acceleration. I like your approach and your intent for this video.

[locknload]

If I jumped my chain on a 2006 F150 5.4L can that cause a " Crank No Start" ? Any help would be appreciated. Thanks 🇨🇦

[andrewwilson]

Never ever rev a sick engine, you will bend the valves. Live data on decent diagnostic computer would show crank and cam signals have shifted. Not your best diagnostic skills!

[fvgmwke]

Would it make the (truck) shake as well?

[noesumale]

Awesome content just the perfect video i was looking for

[lolisduran]

Could car still be be driven, if 🚗 is having trouble with timing belt, or will it cause more damage

[terysamartin]

Tee n emm here just subscribed to your channel thank you for your videos

[chi]

ECM needs to be replaced or refurbished. Takes less than 30mins to remove and replace. ECM must be programmed specification to the car if replacing.

[flipczech]

just had head gasket replaced with water pump and timing belt. significant power loss, hard to get car over 70 mph and lots of white smoke and knocking. what could the issue be? it was a very expensive repair. thank you.