PART 2: My Lockdown Project - Rebuilding A Classic Aprilia RS125 Two Stroke 1999 Restoration

In this video I start to strip down the Aprilia RS 125 two stroke project and make repairs. I will be showing you:
1. Removal of the Aprilia RS 125 clock assembly and reconditioning the subframe. 2. Removal of the Aprilia RS 125 brake calipers, reservoir and replacement of the levers. 3. Removal of the datatool alarm 4. How to check the Aprilia RS 125's spark plug and air filter 5. how to remove the Aprilia RS 125 footpegs.

#restorationproject #apriliars125 #twostroke

[boneav]

You are 100% right to be doing this. I bought an RS last week, 20 years after buying my first.

[acura]

just bought an rs 125 project from my mate . big job as he was half into it wish me luck. thanks for the video, helpful!

[samu]

I just bought an used Aprilia rs 125 2007. I want to get it as tiptop shame as i can but I don't know wtf I am supposed to do. Thank you for these videos. They are definitely underrated

[magnuspersson]

I have one but it’s a year 2000, restoring it and making it shine here from Sweden

[boddisonsdelcolservices]

I’m currently doing the exact same thing restoring my 2001 rs 125 fp, really looking forward to seeing more from you on here and in the aprilia group👍🏼

[CRAZYRUSTYVW]

I know how you feel. I have build series for a rs on my chanel but it was just ment to be a quick fix and sell but i fully restored it and painted it midnight purple. Its hard to stop when you start. Great video dude be nice to see you do some of the work

[mjnu]

Epic rebuild, I had a nice RS250 back in the day!

[hugoneto]

The place where the bike is looks like ride 3 😧😂💪🏼💪🏼 Nice vídeo

[mitorider]

Great stuff so far, Keep up the good work.

[MRryuhayabusa]

Great job mate!!! I thought u were a really established youtuber because of the quality of your vids. But im suprised that you dont have a significant amount of subscribers. You deserve more views for the quality of your vids!! Keep it up

[tobyh]

I just bought a 2000 rs125 harada edition!!

[tobyreynolds]

Just as I noticed during disassembly of your footrests the chain roller on the brake side is buggered and the exhaust rubber hanger on the left hand side. But nice to see someone trying to do it properly

[anttihelin]

Nice! Have you noticed that air intake rubber twin pipe has smaller ports at round shape heads and bigger at other side ports. I tried both ways and I considered the round shape pipes in the airbox, while bigger will stay outside. Reason for the decision is that it actually was somehow better while bigger ports were at outside. I figured out that if the flowth will accelerate in smaller round shape tubes and even produce somekind of small hurricane, it's just better like that. I even tried to inhale trough the both sides and I found it easier to breath while I inhaled trought the round shape. So it's somekind of funnel or even diode -shape. I would say bigger ports does collect air better, so maybe you would like to try it so also, thanks!

[PabloConcrete]

Great episode! This is getting interesting! Thanks!

[ianhamilton]

Liked and thanks as always...stay safe...🏴󠁧󠁢󠁳󠁣󠁴󠁿

[steven-vnui]

Why not just slightly crimp that stretched spade connector for the water temp sensor? Best to avoid cutting the loom if you can bud.

[shellisturbo]

The gear lever has another pin that secures it to avoid it accidently being removed. The securing pins not listed as a separate part and barely appears on the part schematics, with the way everything wears on these bikes your probably best ordering a new ball joint.

[katywalker]

Big problem with adjusting the lever pin so it is too deep is that it slightly preloads the piston, but by doing so blocks the hole from the reservoir into the master cylinder. So as you use the brakes and the pads wear, fluid can’t get into the system to take up the volume. So you soon land up with no brakes.

[martinsliepins]

i couldnt understand why the temp sensor was going all over the place on mine a while ago, and i found that i had the same problem on the temp sensor as you, seems like its not as odd as i thought

[trianedtog]

Nice job make sure thermostat works or take it out