Mocolo 9H Tempered UV Glass Screen Protector instal OnePlus 12 | 12R and older models!

Mocolo 9H Tempered UV Glass Screen Protector instal OnePlus 12 | 12R and older models!

Any questions? Please check our website for contact details!

[Favo]

I install mine. Works fine. No bubbles. Overspill from the glue can be removed before using the uv light. Fingerprint is working just as good as before. 😊 I'm a happy customer.

[bartomiejandrzejewski]

Yasss!!! I've just installed it and have to say that it's great!!! This was my first time in my life when I used glass with UV! No any bubbles and perfectly matched to my 7 PRO!
Many thanks for this video!
Oh and one more thing: when the glass is on the screen but askew, then you can move it gently to strighten before you start lighting with a UV lamp!

[aajii]

Think there's some bubbles below the glass in top right and down right corners

[Danihelus]

I remember having the OnePlus 7 pro. I miss that phone so much with its truly full display.

[sarwoedi]

Thanks for the tutorial, I've done mine using this tutorial video, and its all good! perfect and no bubbles!

[Giroutte]

I think it's worth mentioning to wipe out the excess glue that spills on the edges of the screen before curing it because one you cure it wiping it once it's solid leaves really ugly ripped marks in the edges of the protector

[PatrikGillgren]

I've done this Mocolo installation on my OP7Pro. Totaly worth the £16 i paid for it. Just be carefull not getting glue in the speakergrill (can be a bit tricky to get the tape to stick on such smal area) or on the sides.

[Arojas-wszf]

Just a heads up for anyone doing this, make sure you level out your phone because of the new camera bumps. I did this on my OnePlus 12 and forgot about the big camera bump unleveling the glue but I managed to save it by plugging in my charger to the phone and using a small screwdriver to lift up from the port.

[punjabimunda]

Sir can you help me because i just purchased one and i have a lot of bubbles???

[DG-mimc]

Gaat die er zonder problemen terug af? Ik heb hem er vandaag op gehangen maar de lijmresten worden zo hard als steen, ik maak me zorgen voor hem er ooit terug af te halen. Iemand ervaring mee? Alvast bedankt

[RANDOM_SLOTS]

before installing take time to cover all holes, use the sticker provided or even use tapes to secure all sensitive areas...they did not include it in the instruction and video tutorial so i did it on my own. and it came out perfect. don't rush the process clean well. i guess they should provide more detailed video for new costumers specially in covering all sensitive areas for the glue not to get in.

[astrodax]

The question can this even be removed if broken or scratched?? My understanding is UV adhesive becomes solid when it dries (but this adhesive takes a second under UV light to dry not 4 minutes )

[Sturhm]

I have had this on my 7 pro for a couple weeks now. Works flawlessly, was easy to install. So far im happy with it, my only concern is how to get it off if needed. I have had zero case issues neither so far.

[Biceboca]

I use it for my oneplus 8 pro. It is perfect!! There are no bubbles its like the white stone dome glass but its more cheaper. Its secret: you have to use better uv lamp (I use my girlfriend's nail lamp) and you have to cure it during 20 sec and after 2x 1 minutes!! If you use the original uv like here, I think it wont be good.

[georgedimou]

Thanks mate... Your video helped me a lot! Ignore the haters....

[premtw]

So I've just recieved mine and ofc i opened it immediatly.
Installation was going well, altho i've been sweating after reading how often some of the adhesive gets into the upper speakers.
Everything was going great, altho the sticker on the glass didnt pull off the plasticfoil and one of the lamps of the uv lamp did not work.
I had to lift the glass a few times to get rid of bubbles and as long as i lifted it straight up i could just place it again after removing the bubbles.
No adhesive even touched the speaker and im not having any air bubbles beneath the glass.
The adhesive leaked on the left side of the phone and some is sticking out below the glass, its removable but hard to do so.
Worth the money i'd say and easy to install, even for the first time.

[yasinshoikat]

This one or nilkin dx which one is better?

[atix]

All the glues ended up on my clothes and on my desk because of the camera pop up on my 8 pro is too high. I put the glass on the phone with small amounth of glue that I rescued, but with full of bubbles. :( this method is risky with many of problems. Tomorrow I will buy another type of glass. I`m little bit confused.

[ssXD]

Make sure you put stickers on the speaker or else it'll be completely filled up and blocked with glue. And the buttons and holes etc
If you get a bubble before you cure the glue you can actually egt rid of it I got rid of the most catastrophic looking cluster of bubbles I had. I couldn't believe they were gone. All I did is I was pushed them out just like you would om a normal sticker screen protector. The traditional way. Pressing on the screen and moving behind the bubble till it leaves. I got glue all over the place.
It worked great
I spent much time making sure there weren't any dust or dubree on the screen when I put it

[Hitch-]

is that liquid safe for the phone\?i have xiaomi mi note 10 its not water ressistant