Hydraulic Motor Lab Demo | Hydraulic and Mechanical Horsepower Transferred | Fluid Power Lab

[yakut]

Thank you, you are very inspiring 🌹🌹
The thing I love most is the mechanical devices, they are truly unparalleled.
I subscribed and pressed the like button !

[TAKERUP]

wow please do a "Lab demo" on "how to read a dial indicator" . to me that tacho dial looked more like 600 rpm. I think you need to go back a few lessons and start at "Dont put your hands where you wouldnt put your pick

[yakut]

Please, where can I get the same speed and force measuring devices as those in this video ?

[wildmanofborneo]

Hi if this motor was driving a 3 point hitch PTO chipper, and the chipper has a heavy flywheel that has a lot of momentum, when the hydraulic flow is turned off, the flywheel would keep turning and the hydraulic motor would become a hydraulic pump. Would it pressurize the input lines with the same "polarity", or would the "polarity" flip? Polarity meaning which line has higher pressure (supply line) and which line has lower pressure (return line).

[kkmobilehose]

Was it slipping in the block ?
Also you loose a lot of flow with the quick disconnects. May get more if you plumbed directly to the pump

[sangeethav]

Practically what you have shown was ok is there any way to calculate the speed of the hydraulic motor theriotically if yes please explain

[ericpham]

if we add a reverse input line in reverse to help braking car without need of brake pad cost

[davebrittain]

I don't quite understand how this could possibly measure the torque when the shaft is slipping on the shaft.

[ericpham]

With 4 of these on wheel and a spare tire 3/4 water filled and 60 psi then it cost no fuel and generate electricity at the same time to so we can use it to generate electricity and drive electric motor or half hydraulic motor half generator either way it is fuel less and use gear ratios to get any torque or speed you like base in model of car

[ericpham]

if we add one extra inlet for creating brake then instsall on wheel for car then use airwater pressure to drive it forever the life of the car need no fuel

[zolo]

What brand and type of hydraulic motor?

[nirmalsingh]

Sir,
We have one Hydraulic pump of 40LPM. Its
oil pressure 150 bar . Our requirements is two
Moter running with this pump oil RPM required 70-90
HP 6.5-7.5
Please suggest a hadraulic moter

[ericpham]

I can't read the torque. If the torque high or low we can increase psi and if high enough torque we can increase rpm by gear ratio even high school children can be richer than Henry Ford without pick pocket the population for hundred of years in the thousand of trillion if dollars that kill most the didiotic color men