2019+ RAM 1500 6' Lift | How To Install

Follow along with Jordan as he walks you through how to install our 6" lift system on a 2021 Ram Rebel 1500. This video is a general walk through for our RAM installation that helps give a visual, make sure to follow your provided instructions as certain variations of the 1500 may have small differences to address.

[MichaelF]

Thanks for the video. I'm going to be ordering this kit, or the 4inch for my 21 ram in about a month. Thanks again, from NJ...

[marcosolo]

Great video! Clear, informative pertinent information and no fluff. 💪

[edwardwilkerson]

Very informative even though I only did a 3.5 front and 3 rear. Thank you for all the advice

[carlosbishig]

Great video and hello from Puerto Rico 🇵🇷

[hmac]

I had an issue with the (33gal) fuel tank skid plate making contact with the drivers side rear UCA relocation bracket. I had to remove the left rear hanging bracket for the skid plate, cut off the corner of the skid plate, and drill a new mount hole through the skid plate for the mount.
After double checking all my work, and trimming the skid plate, this caused me a good two hours extra work.

[daveforsythe]

does this install differ from a 4th gen ram?

[lakshmimiriyala]

Lubricate the sachet for easy installation💥

[r_murkz]

What size and kind of wheel
set up the black ford have? In the back ground ?

[Champ-cqpv]

Do you feel this install can be done by someone with good mechanical knowledge even though I have never done one before?

[jessedyeroutdoors]

How long did it take To install this kit without the extra filming and stuff like that.

[SuperDaveMag]

“Now you first step is to put your truck up on the hoist and take your tires off”. When the hell did I get a hoist?!?

[chinitofam]

Well you guys ever do one but for a 2003 dodge ram a quad cab.. want to take it to Mexico and have fun. Get it fixed up and know i habe a amzing setup

[Phystetic]

I wish Ram would have stuck a solid front axle in these trucks maybe like a Dana 44 or 60 even, that IFS crap is garbage

[maddrcbashing]

When you reconnect a track bar do you put the bolt through the top hole or the bottom hole on new driver side mount?

[mejiamortgage]

I just got this lift kit, did you guys add a new brake line that we have to install as well for the newer kits?

[ryanmurray]

how cone no more upper control arm option? i used it before with coil overs for a little more lift in front.. worked great..

[ricardomark]

I installed the lift kit but now my camera not working.. any idea why?

[btjr]

Is this install just for the rebel or is it the same for all 5th gen 1500 models?

[LogPressPanda]

What do you torque the tie rod end nut to? (The nut under the knuckle that holds the tie rod end into place?

[brenteverett]

Factory coils re used? Did I miss something?