BigTreeTech - SKR 3 - TFT70 v3 0 install

This is a brief tutorial on how to install TFT70 V3.0 on BTT SKR v3.0

Playlist for SKR 3:

One Time Tips, You Can PayPal Me:
Discord:
Patreon:
buymeacoffee:

Hardware:
1 - BigTreeTech SKR v3
1 - USB Serial cable
1 - SD/TF drive with adapter

Amazon Affiliate Links:
TBD (SKR v3)
TBD (Micro SD adapter)

Software:

Documentation:

[matthewsager]

Thank you so much for your videos on the SKR 3! I got a SKR 3 EZ for my Anycubic Chiron, and they all have been a big help with getting things up and running, getting closer to having it working with every video you put out!

[xSassinaKx]

Thank you for all of your help, thru-out my SKR 3 EZ w/ TFT70 upgrade! I also use the back of the box as a pin guide.

[behnama]

Thank you sir, i like your vido to learn something. I got SKR 3 v3 and TTF 70 i want to install it to Creality Cr-6 se i hope your video help me more.

[ronaldmerema]

Great Video, i followed the video exactley to install aTFT28 v3.0 on a SKR 3 ez board, but it doesn't work.I get every time in the screen "Printer not connected" do you know what is going on? It looks like my serial ports don't work

[infamousm]

Would this guide be basically the same way you would use for the BTT TFT35 E3 V3.0? Thanks again for making these guides. Much appreciated!

[jrbarker]

I did this with an SKR 2 (used the proper environment etc for my board), set the baud rate just like you did, but my display still says no printer attached and when I flip over to Marlin Mode, it only says Marlin Mode at the top and doesn't give me any information. Any ideas?

[dragnet]

I noticed in the latest firmware of 2.1.2, that it shows //#define BIQU_BX_TFT70. I am curious if that is the same thing?

BTW I learned something new...Ctrl+/

[olaff]

I have an SKR 3 EZ and my core files only contain the non-EZ board. Is it ok if Ijust copy your line into my core?

[neodymium]

Can u help me, i have biping sound and restarting circle all time after update i tryed everyting and now i am stuck

[kelvinsmith]

Hello,


First of all I wanted to thank you for your channel and the effort you put into it.

But I also have a problem, but unfortunately I can't find a solution.

I have the SKR 3 EZ with 5160 drivers and the BTT TFT70.

At first I wired everything up and then powered the whole thing via the USB port.

I could find a connection between TFT and the board.

Then I flashed the firmware and now have the message.

NO PRINTER CONNECTED!

Did I miss something?`

LG

[drderrp]

great video! is there a chart or something for a compatible screen that will fit my cr-10 v2? I can't seem to find anything useful

[terrynicholson]

Im upgrading from an e3 turbo. Which only uses exp1. Does the skr3 specifically need exp 1 and 2?