how to fix Bluetooth earbuds not charging in the case

a simple way to fix dead earbuds that won't charge

QCY T2C in my case but this method works for most earbuds

[TheSharkB]

after fixing your earbuds let it charge completely. and to prevent this problem to happen never use your earphones until it dies from low battery always put it in charge before it turns off

[assweettooth]

You're my life saver. Almost cried because of my 6 months earbuds not charging anymore. Thankfully I saw this. Thank you so much ❤

[HighwayCourse]

I knew someone had come up with this idea before me.
I own Mpow X3 and they were totally unresponsive (they have no physical buttons).
I tried with one cell first, the light didn't turn on. I eventually connected 3 cells (4.5V summed up), and they still didn't turn on, but I thought maybe I should use a different method, and upon opening the case (charger case) I pressed down and released the earbuds repeatedly while the light of the case was still on.

I don't know what helped exactly, but both of the earbuds came alive... They had been dead for quite a long time, so I didn't expect them to.

Thanks for the useful short video!

[jukrvv]

This worked for me. My Skullcandy Indy ANC earbud stopped working, and doing this fixed it! Thank you!

[fritagonia]

One way to jumpstart the battery in the earbud is to use a charging cable that is broke/has one or more of the wires exposed. And then you can try to form a circuit using any type of battery/powerbank with the wires and try to hit the pins in the earbud. Aluminum foil or any small metal pin (needle) might work.
You might have to try a couple of times to hit it correctly and or just the right amount of voltage but it worked for me :)

[shinra]

It worked. Thanks😊 I thought I lose hope on fixing my left earbuds. You're a lifesaver.💖 I will keep mind that do not lowbatt the battery of earbuds to keep it from working.👌

[magicpotion]

You jumpstarted your earbud, I love it! I so wanna try this and I have faith in it working but i gotta figure out where to get the cables from for it😅

[antonromanov]

Well the clever way to do this would probably be to measure the charging voltage first, and then create a series of batteries to get 1-1.2 of this voltage. For my JVC HA-A7T it was 5V so four 1, 5V AA connected in series got me 6V. Worked like charm.

[jugikz]

Thank you for this tutorial! My earphones are working again!!

[rafasimsim]

I would kiss your feet, sir. Your solution saved my Huawei freebuds 4i. You're a true hero. THANKS!!!

[dondrayton]

I wish I had looked at this video before I threw my first pair away, thank you for the tutorial cause it works

[rickweatherly]

Wow! This worked for my Skullcandy ANC Indy left earbud which was not showing either red or blue lights! Thanks!

[elbertpalon]

Hello it is ok to use any magnet and if there's no magnet can i use a tape

[shashankmendan]

How did you identify the positive and negative terminal for the earbud?

[sridhar_venku]

Thank a lot ....it worked for my JBL Tune beam ❤️❤️

[max]

hello friend, i have a problem with my realfit f4, the long touch no longer recognizes the change of noise cancellation/transparency mode, i can only do it through the “original sound” application, but i can no longer do it through the touch, even if i change the gesture settings, is there a way to solve this bug?? or alternatively is there the possibility to effect a reset to the earphones or the “original sound” application?? Thank you 🙏

[CorleoneBagio]

Its work for KZ Z1 even though not bipp iam put in box charger work thanks💯💯💯

[blackhole]

Worked on my Honor Earbuds, thanks mate!!!

[ahmedtallal]

How do we figure out the negative and positive terminals on the earbuds though?

[paulog]

read a lot of comments that this worked. I'll try this on my QCY melobuds which I forgot in the laundry. The left piece is working but the right won't even after letting it sit in rice for 3 days. Hope this works! I'll update if it does (fingers crossed)