Ultrasonic Thickness Gauge

Click here to purchase this product:

Ultrasonic Thickness Gauge and Meter – Max Range 220 mm - D1140772
The ultrasonic thickness gauge and meter has a max range of 220 mm. The size of the unit is 80 x 38 x 150 mm, and the resolution is 0.1 mm.

Function
The ultrasonic thickness gauge and meter works by emitting a sound pulse and measuring the amount of time it takes for the pulse to return to a probe on the unit. The thickness of the material is then displayed on the unit’s screen.

Applications
The ultrasonic thickness gauge and meter can be used in engineering and industrial applications. The typical application is to measure the thickness of pipe, and in general when any material needs to be measured non-invasively.

[voyager]

If there is no bloody liquid inside the pack itself, and instructions are not talking about using a liquid I was about to start up the refund process from Amazon... And I have given a chance to see your video.

It actually works!
Thank you very much for your effort to make this video and sharing with us.
Regards!

[willzhang]

the direction of probe is also important when measuring tube thickness to make sure sonic wave is traveling through minimum distance

[neerajdwivedi]

You have to set velocity for different metals.

[bigbobtong]

HOLD IT YOU DON'T know how this machine works  YOU ARE DOING IT ALL WRONG !!!    You forgot to change the Velocity setting when you measure different materials
that is why your Copper pipe measured thicker then the steel pipe in the middle.

[jamesburningham]

5690 m/s is the speed of sound for the 304 stainless steel calibration block. Apparently I am not the only person who has noticed this error. It is amazing that it has not been responded to.

Perhaps this video was produced quickly to promote the sale of the device with no technical understanding.

Also, There is a 4 mm calibration block on the device, you don't need to use a separate one.

It is sad, I thought I did not understand the device at all yet the instructional video understands much less.

[skysurferuk]

1:37. No. The S.O.P. for U/S testing is to dab the job, not the transducer. It (in this case) doesn't matter, but get into good habits... Why are you using a separate calibration block, when there's one right there, built-into the meter?
No mention of different material velocities? I was wondering if you can enter a velocity manually?

[iseengineeringinc.]

How do you (or can you) change it from reading mm to inches?

[satendrapatel]

Nice video sir
What is the cost of this machine

[MosquitoRanch]

I am looking for an ultrasonic thickness gauge. I need one that will work on steel pipe & tubing. I will never need to measure anything over 1 inch thickness. SOMETIMES, I will be dealing with material that has already been painted. I prefer a meter that shows imperial instead of metric, although I can covert it afterwards if necessary but it would be easier if it was imperial to start with.

[Mukund]

Can it be used to measure thickness of wood?

[rahulkarmakar]

Can I use this device for other metal

[ticleve]

So this would work well for measuring the metal thickness across the face of a titanium golf driver or would titanium require a different instrument?

[odaialhussini]

You don't know how to use it, you should change the velocity to measure different materials

[beachboardfan]

What if the surface you're trying to measure is concave like from the inside diameter of a pipe?

[mahamadshareef]

can we measure ice thickness with this

[gabrielbsalvatori]

can this gauge measure wall thickness in curves, like the inner side of the large tube? like if I had to measure from inside out of the tube. I have very unregular parts, with small radius but I still have to measure the thickness on these radius. can it measure the thickness in the radius of a bended steel sheet?

[theworld]

Anyone please tell...
.
Why we use gel or grease while measuring thickness ????

[xaviersape]

Hi, i would like to know if the pipe is already painted, is that will affect the measuring?

[azizh]

All you did worng ! you shold have changed the velocity for each metal this is why your copper pipe measured thicker than the other pipes .

[ledapocchi]

Can this be used to measure wood thickness?