Disable Magnetic Suspension MK2 TTS/ TTRS! Vagcom/ Obdeleven

Just a quick tutorial on how to disable the suspension error you will get when unplugging your stock suspension. The alternative is to buy expensive cancellers. This is much cheaper & easier. This is a U.S. Version car, so I am told coding elsewhere may be different. Thank you for watching.

Check out some VW/ Audi performance parts!

Instagram:
@autobahn_mk6

[jakjak]

better than magride? more road feeling and predictability without sacrificing comfort?

[Neil-]

You didn't demonstrate turning off esp fully, which was why you were going to make this video

[niclasweidner]

Which OBD 11 do you use? Could you please send me the link? I drive a TT 3.2 V6 Facelift

[WllShoots]

Hey I have a 3.2 a3 with magnaride this worked to remove the light but my esp still doesn’t work. Are you having this same problem?

[zeroA]

Is the procedure the same if I want to keep the the other values, highline, manual transmission, TPS etc…I am fitting coil overs to my TTS this weekend and have looked at OBDeleven as I know once I disconnect the mag ride it will throw a code.

[nelsinivr]

I have a 2012 TTRS… but what did you do for the headlights? Does the tts have the adaptive headlights??

[caleblloyd]

Any idea if this will work on an s3? Just ordered coilovers and wanna save the money on the cancelers if I can

[swissjetpilot]

How do you plan to fix the headlights? DCC sensors are also used for Headight Range via CAN.

[Neil-]

Remover MAGNETIC RIDE TTRS 8J

Before you start this procedures

-> You need put car in a plan surface

-> put steering wheel in middle position (wheels)

-> put key ON (battery position) and put your head light button in automatic for a few seconds (this will calibrate lights at normal position)

-> remove key from car and disconnect the front lights button (off position)

-> disconnect plugs from front head lights (xenon)

—> MAKE NOW THE ALL STEPS and after all made, you can conect again the xenon lights plugs, now the xenon will have same position they have from factory and NO any lights on DASH from head lights and Suspension ✅



Steps:

- Gateway remove ☑️ of number 14 (suspension) and 55 (head lights)

- (17) Instruments Remove number 64 at first number (in coding), example if coding is 81148, you put 17148

- (03) Abs you remove 8192 at full coding number, example if have 616343 will put 608151

- Go to each module and remove/erase DTC (errors in memory)

⁃ disconnect VAG-COM and key from car

- Remove fuses number 9 (Suspension fuse) and number 5 (AFS fuse)


—> NOT CHANGE CODING IN (55) Head Lights to 10, here need be the OEM from car my case 11 (if not, you will have light in dash ON)

—> NOT disconnect the Suspension module/Head light (both use same module)

[egorzaitsev]

this is not quite the right way. thus you only removed the fault indication. for full operation of the adaptive lighting system and shutdown ESP you still need to install the cancellation kit. I make such a kit 2 times cheaper than К&W.