Putting the clock movement into Beat. Clock repair basic timing and regulating tips explained.

preview_player
Показать описание
A video lesson for the beginner to put the clock in beat. This is a shorter version of the detailed explanation in the complete full length 4+ hour clock repair course “Clock Repair 1 and 2”. The basic concept of timing and movement regulation is explained here. There are many more lessons and tips discussed in the full length course.

ABOUT THE FULL COURSE:

The full clock repair video DVD course is over 4+ hours of clock repair lessons. A course manual is provided.

The full clock repair video DVD course version: This clock repair course consists of 2 volumes for a total of 4 DVD discs playable worldwide. Total course running time: 4 hours and 21 minutes. There is a detailed 38 page repair printed manual full of additional tips, illustrations and diagrams. Included is a 4 page DVD/video program outline is included for going back to segments you may need to review. All tools, materials, and equipment used in this video course are listed in the manual for easy reference to model, make, price, and where they can be purchased.

See and understand with close up shots of actual clock repairs. Learn with minimal and common tools. Many of the tools are adapted for clock repair from everyday ordinary tools. Not a lot of expensive equipment.

I have published many clock and watch repair courses over the years. Here is a list of the products published:

Рекомендации по теме
Комментарии
Автор

Clearest demonstration of putting a clock in beat that I've seen on YouTube. Thanks!

hosocat
Автор

Thank you John for showing me how to adjust the crutch and how to make an adjusting tool. This video was very helpful and informative.

aldimmett
Автор

What a great and very helpful video! I fixed a Grandmother clock that has not worked in years. The crutch on it was more of a flat rectangular piece of brass versus a round metal rod. I had to hold it tight at the top with one pair of needle nose pliers while using another needle nose pliers to bend it clockwise. I got luck and hit it perfectly on my first attempt. I leveled the clock with a digital level to 0 degrees and it sounds and works great.

Thanks again.

MarkTrafton-vg
Автор

The clock should be leveled before any adjustments are made.

johnbrodehl
Автор

Thank you just ordered my first beat amplifier and was unsure of how to use it.

jessicaa
Автор

It would have been nice if you had zoomed in towards the mechanism. Thanks for doing these

marvlinke
Автор

It should be pointed out, that not all crutch adjustments require bending.

johnbrodehl