How To Install Blum Undermount Drawer Slides

In this video I will show you how to install Blum undermount drawer slides in your next cabinet project. After watching this video, I am confident you can jump right into installing these on your own. Whether you are using a face frame, frameless with overlay, or frameless with inset, this video is for you.

Slides I used in the demo:

Rockler Undermount Drilling Guide:

#drawerslides #undermountdrawerslides #blum

Find me on social media!

Bent’s Woodworking is Sponsored By:

Harvey Woodworking - Go check out the Gyro Air G700

Bent's Woodworking is Proudly Partnered With:

Festool USA – See everything that Festool USA has to offer
Bessey Tool North America – The only clamps I use in my shop
Bits and Bits Company - Save 15% on your order with the code BENTS15

Bent’s Woodworking Affiliates:

Affiliate links to items used in this video below:
DISCLAIMER – As an Amazon Associate I earn from qualifying purchases.

Camera and Audio Equipment I Use:

[selcukbugan]

the best explanatory video you can find on youtube!!! Finally someone who explains it down to the smallest detail and especially on the most important things like e.g. the dimensions, the distances, how to measure it exactly, etc. I think it's absolutely great! Thanks for that. I'll definitely leave a like and a subscription there.

[mvred]

This is the best instructional video on YouTube. You will understand if you have looked at Blum's instructions for glides or hinges. Blum should leverage this video.

[jensenjoinery]

This is really an incredible guide. The instructions look so intimidating. I appreciate you “distilling” them

[davidschneider]

I can’t tell you how hard I’ve looked for a comprehensive way of installing these drawer slides over the past three weeks your timing couldn’t have been better thank you Jason

[albertoormeno]

There is only one thing that I want to say: Thank you, this was one the most clear demonstration video about this drawers slides !

[justincowen]

To locate the position of the locating pins in the rear of the slide, just install the drawer and lightly slams it a few times and the pins will leave an interference mark. Then drill your hole. No need for an expensive jig.

[woodcoenergy]

I work with industrial furniture/appliances and I have to say this is the clearest explainer video for any piece of equipment requiring assembly I’ve ever seen . Great job 👏

[provost]

I've used a variety of drawer slides with absolutely zero information and guessed or searched the process on how to do it. Your detailed explanations far exceed what the manufactures put out.

I'm going to be switching over to this product now because of your masterful approach.

Thank you.

[bbirdiebirdie]

Thank you Jason. This is exactly what I am trying to do and your video is giving me the confidence to actually do it.

[argdkc]

Great video! Don't forget about the side-to-side adjustment wheel below the hook on the back of the right runner. This allows the rear of the drawer to be adjusted in the same direction as the front so the drawer runs parallel in the opening.

Also, if you're having front locking device engagement issues (i.e. the drawer isn't "clicking in" like it should), check your material thickness. Most 1/2" plywood is actually 12mm and this causes your runner to "stretch" further than it was designed. The quick fix for this is to make your box 1/8" shorter than the standard runner length (20-7/8" for a 21" runner) or add an 1/8" spacer between your locking devices and drawer sub-front.

[jeffberg]

I go back to your video’s over and over just to review and pick up what I missed the last time. You talk about subjects I need to know about and you do it logically and slow enough that I understand your message. (Most of the time, my error not yours.). Unfortunately I can only like it once but I’ve watched then many times. Thanks for putting this content out here. I really appreciate it. And, Thanks for your Service.

[Personalized_Workshop]

From, “the only video you’ll need to see”, I’ve appreciated this video for reference on numerous occasions. Although I can’t keep up with all of the latest Festool tools and accessories featured in more recent videos, I still find the work assembling table and awesome features entertaining to watch. After nearly a year after ordering the Blume undermount drawer slides, I’m finally able to complete the cabinets with drawers.

[isaiassanchez]

man what a good video the way you explain all the fine details is great.

[toolnr]

Thanks for the tip to turn the cabinet on its side when installing slide fasteners. I can’t believe I never thought to do that. 🤔

[msix]

Thank you for this video! After hours trying to decipher what Blum calls “instructions” I ran across your logical explanation of how to measure, cut and install these drawer glides.

[buffalosoldier]

Bent, you’re one of the best instructors out there. I’ve watched many others on YouTube and like many of them but your voice and pacing work real well for me, thanks.

[WelcometotheWoodsBlog]

Thank you so much for making this extremely thorough video - it helped me a ton!

[mikecaul]

Great video . Just two things I thought people might find helpful. First the hook on the back of the slides is also an anti tip feature for the drawer. So make sure the tabs are inside the holes.
Second if you have to remove the drawer box that has the drawer front attached you will actually have to reach underneath and pull the slide towards the clip till it clicks. Due to the slide being set back 1/8”. If you just push it in it won’t click and the drawer will most likely fall forward when extended.

[bretthollenbeck]

Thank you so much for doing this video. I too was a little intimidated by these drawer slides but your video makes it look much easier than side mount, especially when it comes to actually installing the drawer. Matching up the slides on each side with side mounts is a real pain. This is definitely the best video I’ve found explaining this process. Thanks!!

[terichampion]

I cannot stress enough how superior your videos are compared to others. You have truly found your post retirement calling. Thank you so much.