Wahuda Jointer Easy Assembly

preview_player
Показать описание
Here is a simple, easy to follow step by step assembly process for the new Wahuda jointer. Key points are listed below:
0:00 Introduction
0:55 Packaging
1:44 Dimensions
2:04 Sealant Removal
2:40 Fence Assembly attachment
3:02 Fence Attachment
6:16 Guard Removal
6:40 Infeed table
7:11 Cutter Check
8:45 Squaring the Fence
9:47 Cutter cleaning
13:00 Guard Replacement
13:27 First Run
  1. George Fotinakes
  2. Wahuda jointer
  3. wood jointer assembly
  4. simple assembly
  5. Cutech jointer
  6. Rikon jointer
Рекомендации по теме
Wahuda Jointer Easy 0:14:41

Wahuda Jointer Easy Assembly

Official Wahuda Jointer 0:14:19

Official Wahuda Jointer Setup Guide

Wahuda Jointer Setup 0:18:48

Wahuda Jointer Setup Process, Infeed Outfeed Coplaner, Alignment Adjustment Benchtop

Wahuda 8' Benchtop 0:16:51

Wahuda 8' Benchtop Jointer with Spiral Carbide Cutter Head Review and Setup Tips

Wahuda Jointer Unboxing 0:00:59

Wahuda Jointer Unboxing #diy #woodworking #jointer

Wahuda Bench Top 0:10:29

Wahuda Bench Top Jointer Unboxing With an Amazing Story!

Here's What a 0:07:53

Here's What a Wahuda Jointer Is Actually Like After 2 Years

Wahuda 6” Jointer 0:16:55

Wahuda 6” Jointer - Unboxing and Review

Wahuda Tools 8 0:09:21

Wahuda Tools 8 Inch Jointer First Look

Wahuda 6” Jointer 0:07:12

Wahuda 6” Jointer - Quick Review and poplar board demo

Wahuda 10 Inch 0:12:34

Wahuda 10 Inch Jointer - Replacing Full Size Jointer with A Benchtop!

Wahuda Jointer Features 0:05:29

Wahuda Jointer Features & Benefits: Is It Worth The Hype?

WAHUDA 6 inch 0:04:50

WAHUDA 6 inch bench top jointer unboxing/ introduction

Unboxing and review 0:09:26

Unboxing and review of Wahuda 8” Bench Top Jointer

Simple Table Extensions 0:03:31

Simple Table Extensions for a Benchtop Jointer

A look at 0:12:30

A look at the King Industrial (Cutech/Wahuda) 8' Benchtop Jointer

Wahuda Tools Jointer 0:03:41

Wahuda Tools Jointer - 6-inch Benchtop Wood Jointer Review

DIY Benchtop Jointer 0:00:52

DIY Benchtop Jointer for woodworking Projects Part 2 #shorts #woodworking #woodworking #trending

Applying paste wax 0:00:15

Applying paste wax to my Wahuda jointer!

Wahuda 6 inch 0:11:58

Wahuda 6 inch jointer Open box with Paul Sprague

Jointer Setup 0:00:21

Jointer Setup

Jointer Setup // 0:05:49

Jointer Setup // How To Set Outfeed Table Height For Perfect Cuts

Wahuda initial board. 0:06:46

Wahuda initial board.

Jointers For Beginners 0:15:13

Jointers For Beginners - Use Tips, Tricks, Buying Advice and Safety

Комментарии
Автор

just placed my order for a 8"
thanks for sharing

anthonychavez
Автор

Thank you! Very well done. Now I'm headed out to shop to put mine together.

atbien
Автор

I recently purchased an 8in jointer and I’m getting snipe ate the end of my cuts. I put a level and the blade moves the level forward a bit but I don’t see it lifting it . Any recommendations.

dmartinez
Автор

50 inch lb equals 4 foot pound. So a little over finger tight. Snug then a 1/8 to 1/4 turn. If it feels like it will strip it’s too tight?

mitchellkasdin
Автор

Are you still happy with your Wahuda jointer as you were 6 months do you wish you had a floor standing one? Sill deciding which way to go.

lawrencep
Автор

How many passes are you roughly needing to get the result you like?

MixingGBP
Автор

So the infeed table turned to its highest spot will be a little higher than the outfeed table? Meaning there’s no positive stop?

jameswestii
Автор

Your blade was hitting the level and then all of a sudden it was fixed. Magic? That square is not as accurate as those blocks you are using.

ideaguyinks
Автор

Im sending my 6 inch back. The table adjust ment if for a rediculously large flathead screwdriver... they send three tools... none of which will adjust the planing taples. serious waste of time and energy.

brandonbaier