How To Build The Ultimate FPV Freestyle Drone - Components, Build and Betaflight 4.3 Setup Guide

preview_player
Показать описание
Hey peeps. I've been wanting to put together a full build guide for a long time now and finally everything lined up for me to be able to do one. I've tried to cover every part of the build process from part selection to full assembly and Betaflight setup. By following this guide you should be able to build a drone that will fly great and last a long time. I have been perfecting my method and component choice for over 5 years now and feel that this combination is the very best you can buy today.

Full parts list and extra tip below along with timestamps to help you navigate your way through the video. Hope it helps someone. Peace

-------------------------------------------------------------

0:00 - Intro

The 5 parts of a drone and the parts I build with
2:23 - Frame
5:43 - Motors
9:51 - Flight Stack
12:44 - Video Link
14:58 - Control Link

Build Preperation
16:15 - The Importance of build prep
18:01 - Motor Prep
28:31 - ESC Prep
47:41 - FC Prep
50:12 - Control Link Prep
50:35 - Video Link Prep

Final Assembly
53:32 - Solder ESC's to Motors
59:43 - Installing FC & Control Link
1:00:00 - Installing Video Link

Betaflight 4.3 Development Build Install and Setup Guide
1:04:03 - Flashing A Development Build
1:06:00 - Betaflight Base Setup For Maiden
1:11:24 - Reorder & Reverse Motors

1:14:53 - Outro

-------------------------------------------------------------

Frame - HaloRC Archon V3 (Prototype)

Motors
iFlight Cyber Xing 2207.5 1777kv
QUINAS 7% OFF (maybe?)

LED Racewire on the arms

ESC
Aikon AK32 20x20 ESC
BGAikon001 15% OFF

Capacitor
FM Series Panasonic 35v 1000uf

FC
Aikon F7 Mini V2
BGcontroller005 15% OFF

VTX and Camera
DJI Caddx Vista
BGENVISTA 12% OFF

Extra stuff I use

Goggles
DJI HD FPV

Battery
QUINAS 7% OFF (maybe?)
R-Line V3 1400mah 6s

Props
HQ V2S

TBS Crossfire
TBS Tracer
TBS Tango 2

Could use DJI Transmitter, I'm yet to try one.
Рекомендации по теме
Комментарии
Автор

Great video and a great source of information all in one place. good work. 👍

lazerknight
Автор

Great build video! I can’t believe I haven’t found your channel until just now, but the timing is perfect. I am at the “learned on a SIM for a month, became decent on a couple of bind-n-flies, and now want to make my own build, ” stage of FPV and your build video is honestly one of the best. Thanks!

DavidCarns
Автор

Extremely helpfull Bludz thanks. The way you've broken down is ideal 🙏👍

Marksmonkey
Автор

Just the video I was looking for! Thank you! Is this new frame is heavier than Osiris? How would you change the config if you were aiming for more flight time rather than power? Your last freestyle video with a prototype frame was sick, but this is too much power for me.

enf
Автор

Hey bluds have you got a time frame for the release as I'm currently flying 2 v2's but there looking pretty beat-up

wrecklessfpv