An Overview and Demonstration of Record Power's BS350S Premium 14' Bandsaw

This video gives an overview of the BS350S's features and capacities. The machine is shown in action performing a range of different cuts to demonstrate its abilities.

[weejim]

Thanks for the valuable information. I have decided which model to buy now. 👍👍

[johndiakonis]

hi there! I just got one (bs350s) and i must say, beautiful quality and craftsmanship, congrats record power!. However this model is a bit different than the older one on the video so I do have a couple of questions, i noticed with the 10mm (3/8 inch) stock blade(when trying to track it) that it runs in the center of the top wheel but on the outer edge of the bottom wheel. Is this normal? The manual mentions that thin blades might have to run on the inside of the top wheel and not in the middle, again, is this correct? and the other issue i have is that i dont understand how do adjust the lower guides for thin blades 1/4, 3/8, it seems that the triangular guide (carrier casting as mentioned in the manual which is part of the lower guide assembly ) covers the whole blade because if i move it inwards so the teeth show, then the thrust bearing cannot come close to support the blade. So is it correect that the guide covers the whole blade? Any thoughts appreciated. thank you!