How To Epoxy Garage Floor | DIY Garage Floor Epoxy Coating | #epoxy #diy

#DIY #epoxyresin - LINKS BELOW !
Hello Friend, I made this DIY Video for all those who want to makeover their Garage so that it look Beautiful. I always wanted to do an epoxy floor coating in the garage but honestly, I used
to think its very tough job. Its super easy and anyone can do this. In this Video you will see how easy you can do it. When I did mine my son who is 5 years old helped me in finishing one
quadrant.
I saved a TON of money doing it myself and we couldn't be happier with the result. We use this area multiple times a day and every time I step foot on it I am thankful I did it. At the end of
it all, it only cost me about $300 compared to nearly the $4,000 it would have cost me to have it done.
Now in this detailed video, I will tell you all the steps I followed to complete the project and I have given all the links to everything I used in the description.
I am certain that you can do it! Give a try and let me know in comment how easy it was for you.

STEP 1: Remove all the stuff on the floor and take low hanging items off the walls
STEP 2: Pressure Wash the entire floor. Let dry
STEP 3: Apply stain remover to tough spots or entire surface (I recommend entire surface). Then pressure wash
STEP 4: Apply degreaser to tough spots or entire surface (again, I recommend entire surface). Then pressure wash
STEP 5: Apply concrete etching to entire surface. Then pressure wash
STEP 6: Let dry for 48 hours
STEP 7: Use this time to apply Crack and Joint Filler to fill gaps to all areas of need.
STEP 8: Mix the epoxy base and prepare to paint and spread decorative chips.
STEP 9: Paint the floor one Square at time. (Have a buddy go behind and spread the decorative chips right away)
STEP 10: Go across the entire floor with a brush or hand in a work glove & spread decorative chips. Allow to dry 24 hours.
STEP 11: Blow out all the loose decorative chips. (There weren’t many.)
STEP 12: Prep the clear coating mix by mixing in the non skid sand. (Highly recommend using some measure of it).
STEP 13: Paint the floor. Allow to dry 24 hours.
Thanks for watching my DIY Garage Floor Epoxy Coating Video.

What is needed ?
Rust-Oleum : 240 oz. Gray High-Gloss 2.5-Car Garage Floor Kit

32 oz. Concrete Cleaner and Oil Stain Remover

4ft. - 8ft. Sherlock Extension Pole and 9 in. Sherlock Frame (buy Wooster-I recommend do not buy cheap one)

9 in. x 1/2 in. Pro American Contractor High-Density Knit Fabric Roller

11 in. Plastic Rust Proof Roller Tray

Better 3 in. Polyester Flat General Purpose Paint Brush for Water-Based Paint

MaxiFlex Ultimate Men's Large Gray Nitrile Coated Work Gloves

Professional Wood Block Deck Scrub Brush

Wipe's 22 in. Dry Floor Squeegee

* This item is only recommended if you want to Top Coat.
90 oz. Clear High-Gloss 2-Part Epoxy Interior Low VOC Premium Concrete Garage Floor Paint Top Coat Kit

* Below items is needed if you have cracks in your Garage

29 oz. Asphalt Driveway Crack and Joint Filler

10-1/5 in. x 5 in x 2 in. Margin Trowel

Below items only needed if we accidently drop Epoxy on wrong spot & want to clean tools after use

1 qt. Semi-Paste Premium Paint and Epoxy Remover

OR

H‑E‑B 100% Acetone Nail Polish Remover (or any Nail Polish Remover)