Garage Floor Epoxy Coat - Comprehensive Step-By-Step Guide | Builds by Maz

If you want to epoxy your garage floor but don't know where to begin, you've come to the right place! I've done hours of research on this, and have put all my findings into this step-by-step instructional video. This covers the entire prep and application process, and you can do it on a budget with easily accessible products. No more need to spend thousands for this great home upgrade!

FOLLOW ME -----

MUSIC -----
Creative Commons — Attribution 3.0 Unported — CC BY 3.0

MATERIALS + TOOLS -----

[Mr-nicc]

By far the best detailed DIY video I have watched thus far, exactly what I was looking for. Excellent Video man and the floor looks absolutely amazing! I was worried about your toes and the acid 😅🤣. I plan on knocking this out when our house is finished being built! Can't wait!

[zachnelson]

As someone who does this professionally there should never be a question of if you should grind it. You should always grind it. Acid etching is not the same. There are other grinders out there that arent very expensive to rent. I recommend using a grinder that comes with a 2 part vacuum. You will save a lot of time on grinding and clean up.

[tthomas]

This guys step by step was a LIFESAVER!! I probably watched this clip 20 times and he’s not kidding about how much dust is created. Our neighbors came into check we didn’t have a fire in the garage because of the plums of dust leaving the garage. And trust him when he says the shop vac is the final step. There are no shortcuts but our results were amazing! Thank you my brother!

[kasso]

you're brave man. almost no PPE. anyone reading the comments that want to try this, do NOT attempt without proper Personal Protection Equipment.

[TGLASS]

Dude I think this may be the most informative step by step video ever posted. This is on my list after our pool gets put in and I put up new fence. Always something to do!

[paulheron]

Wear boots!!! That grinder almost landed on your foot! Then you poured acid! In flip flops!

[pcbatl]

Great job, when you use the concrete grinder, you can wet the concrete to keep the dust to a minimum. I did this in my basement. Also, if you do this in an air conditioned area, block the return or have the AC off. If you don't the dust can make it's way into your AC unit and potentially damage it.

[tracycummings]

I was genuinely lost on how to epoxy the foundation, and thought it would run off. I'm glad you added the detail about vertical surfaces and cleared up any confusion.

Next mystery to solve is how to move a water heater and appliances before I can start on this project

[wilnewyork]

Bro you are a "talk geek", I got it by the way you described how you did it, the way some people described things they did or do depends on their tone of voice sometimes, yours was exxxx-celent, thank you..

[raoulgarcia]

I like your attention to detail. The prep work really makes the final finish look great and last a long time. Good job

[Neil_Roberts]

Mega thanks for this great video! It saved me from several expensive mistakes. I made a different mistake that I would like to share. I rented a rigid-disc grinder from Home Depot. Because it was rigid, it did not reach into the small low spots on the floor. I had to orbit each low spot for 5 to 10 circles to cut a local dish that was deep enough to remove the original surface. The grinder was also really grabby and unpredictable when it encountered a local high spot. It took a fair amount of muscle to control it then. It also weighed 191 pounds, so transporting it was its own project. The only upside is that it was not very loud, just annoying enough that earplugs helped.

[realamericanz]

Very good video Sir. No BS, just straight to how you did, what research you did prior, and why you chose what you did. All while you show how it was done.

[lolitabonita]

dude u are freaking lucky that the machine did not eat your toes...EPA was not existing in this proyect. I recomment for this project or any other project including power washing to use EPA recommended boots...that will save u a trip to the emergency room or loosing a piece of your body for good. It was interesting to see that u took care of your lungs A+++ on that move, but forgot protection for your feet, long pants and common sense. the explanation on the spot, easy to follow and the end result gorgeous.

[MichaelSmith]

Rust-Oleum went from an oil base 2-gallon kit to water-based gallon. They also raised the price. I was able to get one of the last oil-based kits. My garage is 35 x 35. Preparation is everything. I pressure wash the floor, had a professional come pressure wash the floor with an attachment that look like buffer. I used concrete prep. I also scrub the floor by hand. Working with Rust-Oleum product is a bit different from paint. It was thicker and didn't spread as well as paint. Overall I was pleased with the outcome. I did another garage floor and it came out even better. The product isn't cheap but I think it's worth the effort.

[FAhmad]

Looks great! For those worried about not finding screws and nails that are dropped, considered getting a magnetic roller. They're pretty cheap. I have one from Harbor Freight. I just roll my garage floor occasional and it grabs anything that is metal.

[richardborge]

Best how-to video I've come across (and I've looked at MANY). I'll follow your method to the tee. Thx!

[rodericde]

You made really hard work of that grinder. It is effortless when you know how. Find the balance point where the machine remains in the same place then lightly raising and lowering the handle will cause the machine to sweep in a controlled manner from side to side. Easy.

[billsitter]

A very comprehensive detailed instruction. You seem to have anticipated most of the issues that could occur. Well done!

[russellhorn]

Enjoyed the video as I kinda figured it would take a long time to complete, which it did. It convinced me that I don't want to do it, and if eventually I do, I will hire someone to do the job. But I am 78 years old with bad knees.

[JamieSaives]

I don't even have a garage and this is the BEST instructional video I've ever watched on YouTube! Bonus points for using the word "Homogenous" in the video! Seems impossible you don't have over a million subscribers! Wishing you and your family the best!