We find out if the budget Ariel Atom is healthy or not

Check out the video on how we bought this salvage Ariel Atom!

TANK STRAPS : TANK STRAPS: EVERYONE IS ALWAYS ASKING HOW TO GET THE TIE DOWN STRAPS THAT SRKCYCLES USES AND THE ANSWER IS RIGHT HERE!

[brianharms]

I'm ordering some tank straps on amazon right now simply because I want to support these guys. They seem so honest and that is a quality that is getting harder to find. Bless you!

[patrickm.blanchard]

You should really look into putting a small methanol injection kit on this thing. The reason your car isn't making the power you think is the inlet air temps after the supercharge are probably really high. Some methanol will take care of inlet temp problem, will help with detonation protection, AND give more power. They are really cheap and super easy install.

[TheBibleExplorer]

I just found your channel today & I'm so happy to see someone else who is not afraid to live by faith & share the scriptures with others...
Great videos brother... keep the light shining for all to see...


And for all my wheel'n brothers and sisters out there...
Keep your tires aimed towards the ground and all eyes upon the Lord...

[TheFlyingKiwiNZ]

The Atom is my fave small car, loving the build series and the Bible verse is a cool touch too! Keep it up!

[JVerschueren]

From the body damage it had and the steering wheel being slightly off centre when you're going straight, I guess one of the things you're going to find out about that car is that it's been nose first into a stack of tyres and ever so slightly bent.

[Dug]

That tuner is playing it cool, but he is thinking "my favorite kind of customer" a number chaser.

[myronybarra]

Check the roll pins @ the transmission linkage. Likely you broke one/both. DO NOT replace them w/ bolts, get another roll pin(s), have them drilled @ the ends (make sure they are longer than the original pins) and use a wire tie or small cotter pin to secure them so they don't fall out. Somewhat a common problem.

[stevenesq]

loving the channel bud from the UK (Bonnet) brilliant .

[northernmonkey]

On a UK spec atom 3 the vin is punched on the leading edge of the triangulated roll bar mounting plate.
It's also punched on the top surface of the front mounting bracket for the brake balance / master cylinder assembly.
It's painted over by the chassis powder coat, so it's not always clear unless you're looking for it.

[duncthomas]

Love that little edit at the start with the revs....

[richardatkins]

Dynoing an 800HP NASCAR Busch series engine is really cool. The harmonic vibrations coming off that engine running wide open goes right through you.

[SportbikerNZ]

Man I've binge watched all the Atom vids to this point and should have gone to bed long ago. Really enjoying these vids.

[SethBergile]

I've never been so pumped to see mid 200 Dyno pulls! Keep going!!

[powerglydeKlyde]

great tunes playing in the back round, all them cool projects, great bunch of very knowledgeable guys, and getting to work on your vehicles?!? i would love a job at that Dyno Shop!! looking forward to seeing the atom reach its full potential. good luck with the caddy! God bless

[C_Scalese]

300rwhp will be a blast. Definitely going to be a noticable difference after pulley etc etc because it's so light. 👍

[jameshicks]

I worked for MSI warren stamping in Warren Mi and we had 4 different location and we stamped the heat shield for the Viper and along with other body parts at our Prototype and engineering and at our plant # 2 they also did the hood and some other parts for the prowler. I work for them until they sold out to Peregrine stamping then right before they sold out to Flex and Gate I was their for 10 years before moving on.

[davejeffries]

Hey Sean did you comb your hair with a balloon?

[lindabarrie]

This is the best channel alongside Bikes & Beards great great content

[vermillionvideography]

Watch Sean touch literally every glass window he encounters

[maxwellrundle]

Love the videos man such a sweet car cant wait to see what you do next