Walkers Gel Pad Replacement How To Video

This video is a quick and simple way to pop off foam pads and replace them with the Walkers Gel Pads.

[andrewmartin]

They are absolutely worth the investment. I feel cool to the touch and they sealed a lot better if you have a hat or glasses on

[gin]

I'm really glad this video is here so I wasn't just ganking on the old foam one

[MyMarleyKa]

I’ve watched multiple videos on changing out my new Prohear gel ear pads and “THIS” was the video that I found the MOST helpful! Thank You for this.

[Marzen]

I would not have figured this out w/o destroying the orig pads, thanks! Also, they feel & work amazing!

[kenkrayzee]

Clear and concise. Straight to the point. Great video!

[sherpa]

I watched another video that had me on the verge of ruining the old pads. This video explains how to replace in just minutes.

[thomasstone]

Very easy once you know a couple of things. First: the ear pads are NOT symmetrical, one end is round and the other is flattened, make sure they are oriented correctly when installing. Second: I found a smaller wide bladed screwdriver works better than a coin due to the flat vs rounded end. Third: You do NOT need a lot of inward force, just enough to get the screwdriver edge to engage the slot in the muff. The slot is pretty hidden by the hinge. Slide the blade horizonal between the hinge and the muff. Once the blade end is over the slot, lift the screwdriver to engage the slot using the hinge as a fulcrum to pry against. The cushion should ust pop right off, be gentle as a lot of force is not needed. Using the rounded cushion end first, angle it in first until it engages. Hold the muff in both hands with fingers supporting the muff and thumbs resting on the lip of the cushion starting at the rounded end. Remember the cushion should be siiting at an angle with the rounded end already engaged. Work your thumbs down the sides pressing down and working your way to the flatten end of the cushion. Should snap right in. Took me undet 2 minutes without much force or any cussing. There is no "slot" the cushion has fit into, it is just a compresson fit. Hope this helps.

[chrisc]

Great video. So much more helpful than the Prohear video.

[georgejoseph]

Thank you so much for such a wickedly simple video.

[sushimixyk]

Thank you for the video. Very helpful!

[ianleach]

Thanks so much. Was a little tricky but didn't take long!

[SpencerBurkett]

This is such a great, right to the point tutorial, but the guy's voice cracks me up because it sounds like he wants to be totally sarcastic about the entire thing.

[Self-Improvement-Guy]

worked super easy following the video penny is best as you're less likely to damage the product, if you cant do it like he shows there something wrong with you

[GreatDataVideos]

Very helpful video. Once I knew where to pry the pad, I found a screwdriver bit on my Leatherman to be easier than a penny.

[GeneLucas]

Done! Only a one-cent US coin (penny) fits the gap between the ear pad frame and the hinge! It was easier than I thought. The new gel pads should snap audibly into place. And then inspect the new gel pad frames to make sure they are fully seated all around.

[danbandito]

Ok so these are really easy to get off and much more difficult to get in so when you go to do this swap and it takes longer than this video you aren’t alone. But these are soooo much better than the original pads they seem to block out a little bit more noise than them as well.

[huexley]

I don't get why it does not comes with those pads in the first place

[Greenstrtjs]

thanks! the picture directions on the package didn’t explain as well

[halliewyattjohnson]

I can easily get the old pads off but CANNOT get the new pads on. Any tricks?

[roberthorrar]

Total B. S. The quality was so bad, I had to cut off the old ones and pry and pull off the old bases. Pennies, screw drivers and knife blades failed. After one hour I gave up! New ones snapped in as shown. There are better ones on the market. You get what you pay for.