Electronic Front Sway Bar Disconnect | How To | 2021 Jeep Wrangler

Ready to go off road? The swar bar feature on your 2021 Jeep Wrangler provides ideal front suspension for all-terrain driving. Learn how to disconnect the sway bar, as well as the conditions that prompt sway bar link.

Transcript

[music playing]

[text on screen] Available features shown throughout.

[voice over] If equipped, you can disconnect the electronic sway bar for greater front suspension travel in off-road situations.

You’ll find the Sway Bar switch on the instrument panel, to the right of the steering column. To disconnect the sway bar, shift to either 4 Hi or 4 Low and push the switch. You’ll see the indicator light up in the instrument cluster when it disconnects.
The light will flash until it’s disconnected, or if activation conditions are not met.

The sway bar provides stability and maintains control of the vehicle. Keep it connected during normal on-road driving.

Do not disconnect the sway bar and drive on hard-surfaced roads or at speeds above 18 mph, or 29 km/h, or you could lose control of the vehicle, which can result in serious injury.
To return to on-road mode, push the Sway Bar switch again.

This video is not intended to take the place of your Owner's Manual. For complete details and other important safety information, please see your Owner's Information.

[Text on screen] Copyright 2020 FCA US LLC. All Rights Reserved. Jeep and Mopar are registered trademarks of FCA US LLC.