Design and Simulation of 50 Ω microstrip line using HFSS

[MasudRana-cffn]

Thank you so much, Madam. It is a great explanation of the Microstrip line using HFSS. Again thank you.

[ottoomen]

I did this example twice. I was happy with it both times! Good work.

[shlee]

Thank you for great tutorial of microstrip line simulation. How do you think about assigning absorbing boundary condition surface same as this demo video's radiation boundary dimension when simulated with manually written code 😢

[kantabhattacharjee]

Very nice ma'am, it help me a lot.

[physicssolutions]

Ma'am, please share the link of research paper from whom the dimensions of this project have been used.
Thank you.

[CARlosDAN]

Hola gracias por compartir tus conocimientos saludos desde mi amada Venezuela.

[karma]

Can u plz make a video on 4x4 Butler matrix using HFSS at 5.4GHz

[Malomatitv]

hello, can you help me, how to plot resonance frequency please . i am getting stuck at that point kindly share some videos or any matrial please

[carlosalbertogaleanabetanc]

Hello, do you know how to do a planar dipole with balun?
Thanks for the video

[gizemkaratas]

great video! thank you but Im looking for phase velocity but I coundnt found it can anybody help? Where I can see it?

[editdiyari]

Hello, I just see 1 one S parameter st(1, 1) why we dont have 4 S parameters, can you help me?

[cana]

Thank you so much for the video, is there a reason we need to assign port to both side?

[monkeyhahaha]

MAY I ask where's the difference about the lumped port integral line up to down vs down to up?

[CheeseBurg]

Why the microstrip line is draw as "Rectangle" not "Box"?
Is the copper thickness too small to ignore it?

[musicalbot]

Respected Ma'am, after assigning excitation, why do we make that vertical line from the triangle? What does it signify? Also, here it is from top to bottom but in the coupler video it is from bottom to top. Please explain.

[williewoud]

How to simulate the CPW electrode for independence matching. Could you give a demo by HFSS. Thanh you

[DownJeans]

Can't we just drag using the middle mouse button to rotate quickly

[hammadissa]

Hello, can you help me to design microstrip line discontinuity step width using hfss

[Houssemilan]

I don't understand why you simulated an arbitrary line not 50ohms line that you have calculated in the first part of the video?

[DownJeans]

in hfss 2022 r2 I'm unable to create lumped port