How to Replace Steering Damper 2008-2010 Ford F-250

Buy Now!

This video shows you how to install a new steering damper on your 2008-2010 Ford F-250. If your trucks steering feels unsteady, shaky, or vibrating, you might need to replace the steering damper.

This repair was done on a 2008 Ford F-250 Super Duty XL 6.4L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2008 Ford F-250 Super Duty
2009 Ford F-250 Super Duty
2010 Ford F-250 Super Duty

Tools you will need:
• 18mm Wrench
• 18mm Socket
• 3/8 Inch Impact Gun
• Hammer

Check out our playlist:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[TRQ]

√ Watch the Video
√ Do it Yourself
√ Save Money

[bobsue]

Always torque the nut, NEVER the bolt.