Ctec XFP Repeater Panel For One loop system

Ctec XFP Repeater Panel For One loop system
Description
XFP 16 Zone Repeater Panel (all protocols)
Can be used to repeat the functions of an XFP Main panel at remote parts of a site (e.g. all potential fire service entrances).
Offers all of the functions and controls of an XFP Main panel (access levels 1, 2 and 3).
includes an on-board fault relay.
Requires its own dedicated Mains power and battery back-up supply.
A maximum of eight XFP Repeaters can be connected to one non-networked XFP Main panel.
Communication between the XFP Main panel and Repeater requires a CFP761 network driver card (fitted as standard in all XFP510-16s, available as an optional extra on Main XFP 16 Zone panels).
Repeater network wired in 1.5 mm2 two-core screened fire resistant cable. Network length must not exceed 500 metres.

[powergemelectrical]

Hi, I am an installer myself & was wondering if you’ve ever come across an issue with this panel not responding to the turn of the key or not responding to the menu buttons for logging in using code. The system has been programmed & was working absolutely perfectly when I left it until the time it once triggered when somebody decided to play with the call point & from that point on this panel stopped responding. However the main panel was then used to silence & reset etc… thanks.

[alexaesemacalister]

White Steven Lewis Larry Moore Timothy

[MorleyJamie-tk]

Moore Edward Robinson Margaret Garcia Betty