Milling and NO CHIPPING

preview_player
Показать описание

Follow Dr. James Klim
#cerec #emax #primemill #mcxl #ivoclarvivadent
  1. James Klim DDS
  2. e.max
  3. CAD/CAM
  4. CAD CAM
  5. Primemill
  6. Primescan
Рекомендации по теме
Milling and NO 0:06:21

Milling and NO CHIPPING

We tried rough 0:00:28

We tried rough machining with a no chattering end mill, the machined surface was incredible! #cnc

Why Would You 0:03:37

Why Would You Ever Use CONVENTIONAL Milling??? | Climb vs Conventional

Preventing Mill Chipping 0:02:59

Preventing Mill Chipping on e.max Margins

OSG 60sec Troubleshooting 0:01:21

OSG 60sec Troubleshooting - Milling: Reducing Chipping at the Corner

Cutting The Ends 0:03:45

Cutting The Ends Of Carbon Fiber Tube on CNC Mill | No Chipping Technique | Tormach How To Video

How to Decide 0:03:25

How to Decide Which End Mill to Use in Aluminum | A Quick Beginner's Guide to Milling in a Torm...

How to Eliminate 0:05:13

How to Eliminate Chipping Risk when Setting your End Mill Height

OSG 60sec Troubleshoooting 0:01:33

OSG 60sec Troubleshoooting - Milling: High Speed Milling & Chip Thinning

Chip Load vs 0:06:23

Chip Load vs Feed per Tooth - The Machining Doctor simplifies these milling terms for you!

Tips film: Golden 0:01:59

Tips film: Golden rules - thick to thin milling machining

This CLEVER ROUTER 0:03:23

This CLEVER ROUTER TRICK Might Be THE END of Jigs In My Shop / How to Route a Dado / Woodworking

End mill TPC 0:01:12

End mill TPC with more chip separators from the GARANT Master Alu family in action!

difference between up 0:09:02

difference between up milling and down milling | Up Milling and Down Milling| Basic Milling cutting

Haas Mini Mill 0:07:07

Haas Mini Mill Chip Clean-out Door | My Haas has no chip conveyor, so I made this.

Difference Between UP 0:21:46

Difference Between UP Milling and DOWN Milling- Mechanical Engineering

HOW WE MAKE 0:05:42

HOW WE MAKE MONEY $$ FROM SAWDUST: a byproduct of the mill

End Mill with 0:00:21

End Mill with 65 Inserts OBLITERATES Broken Knockoff Vise #shorts

First Chips On 0:14:33

First Chips On The Giant Cincinnati Milling Machine.

DESTROY a Metal 0:00:42

DESTROY a Metal Credit Card on a Milling Machine!

DIAEDGE MS Plus 0:00:37

DIAEDGE MS Plus Swiss Type End Mill Series for Stable Machining without Chipping

Turnpike Troubadours - 0:03:22

Turnpike Troubadours - Chipping Mill (Official Lyric Video)

We Covered 1/2 0:15:40

We Covered 1/2 the Garden in Wood Chips | 2 Years Later Soil Tests Reveals the Impact

TungEight-Mill - Low 0:00:18

TungEight-Mill - Low cutting force cutters ensure effective machining of low rigidity workpieces

Комментарии
Автор

Gracias I am a dental technician in Dallas Texas your videos are very educational good morning 🌄

aroncarvajal
Автор

Hi Dr. Klim, I purchased a small private practice about a year ago. The previous owner had an MCXL (I use the 12s bur) and primescan and the patients are accustomed to same day crowns. I also have the speed fire oven. I have spent $$$ repairing the now 11 year old MCXL (I've replaced all but 1 motor at this point) and am looking to replace it. Would you recommend buying another MCXL due to the ability to use the smaller 12 bur or the primemill? Or would you recommend I switch to one of the PrograMills PM3-5? Thanks in advanced for your advice!

camaniscalco
Автор

Hello James,
How can I avoid shrinkage in emax crown on an implant abutment after crystallization and staining. Currently before crystallization and staining the margins are looking good.
Also do u recommend ivoclar staining and glazing kit?
Thanks
Sushant

sushantrohilla
Автор

What are your thoughts on Tessera vs Emax, now I noticed Emax less prone to fracture which suprised me due to the fact Tessera has 10% zirconia in it.

martinzoutable
Автор

Hello . How many units did you do for same day service?

kevink
Автор

I thought you recommended
marginal thickness of +100microns to avoid chipping? Is this no longer the case or does it not apply when using EF milling?

yonipolack