HobbyKing Hexacopter H550 KK2 DJI F550 First Flight

Finally received my controller and props and here it is. Love it.

[Rumble]

Great job! I'm about to start getting parts together for my first build.
Nice flying too!

[dirtydfpv]

Ya at this point I'll try anything haha, it's my first kk setup so the pi gains are being a pain for me. What's the pi gains on the hex? And the pi gains on the octo? Both for self level and manual .They both seem to fly great and mine is unstable. If you got the time I would appreciate it. Thanks

[dirtydfpv]

Looks good man, what firmware is the kk flashed with? I have a similar setup with the 1.12s1 steveis and I can't get it dialed in. What's your pi gains? Thanks

[dcam]

Does the Ardupilot Mega 2.6 do the same job as the naza V2 with Gps module?

[rolo]

Hi, Im looking for anything like this "DJI F550 ARF Copter w/ Landing skid & H3-2D FPV GoPro Gimbal & Naza-M V2 Combo" but wayyy cheaper. What do u recommend me ?

[southernrcdude]

Can you share your KK2 Board settings?  I am having trouble with the 'Auto Level' settings.

[dirtydfpv]

I have a similar setup, total is about 500$ with radio and 3c 6.0mah battery.the hex can lift a gimbal and gopro with fpv gear without breaking a sweat. Also with the kk board you will never have a fly away. That's what I like about mine. It does what I tell it to and I have piece of mind knowing it isn't going to fly away to multirotor heaven.

[SABEMM]

Nice flying! i just built one and i can't get it off the ground! the motors are spinning right direction, the propellers are on the right place but i just can't get it off the ground! im using KK2.0 hexacopter x config, 28/36 750 kv motors, 1045 props please help!

[TechNomadNobel]

can you pls give me transmitter setting

[simobouryal]

hi would you please share your setup with me ?

[daaznman]

PLEASE I NEED When I fly my hexacopter, it is very unstable. I have a kk2 board and I tried their pi trimming tutorial, but it is still very unstable. Please help!
Specs: Motor: NTM Prop Drive 28-30S 800KV / 300W Brushless Motor (short shaft version) (AR Warehouse) ESC: URNIGY Plush 30amp Speed Controller (AR Warehouse) Frame: DJI f550 Flight Controller: kk2.1 Props: 10x4.5