RaceFace Turbine Cranks Removal, Install, BB Check - Kona Process 111

preview_player
Показать описание
How-to remove / install the #RaceFace Turbine #crankset, checking the BB bearings, everything you need to know!

For parts and tools please consider using these links, they help me fund these videos. Thank you!

SRAM Eagle Aluminum Cranks - DUB

Chainrings

Eagle Chains

Bottom Brackets

Eagle Derailleurs

Eagle 12 Speed Cassettes

Eagle Shifters

Shifter Cable & Housing

Tools, greases

⭐FOLLOW ME on SOCIAL

My channel is not sponsored. All opinions are my own, 100% honest. Some of the links in this description are affiliate links. I earn a small commission if you make a purchase and it's no additional cost to you, I appreciate your support!
Рекомендации по теме
Комментарии
Автор

Thanks for the vid! Gotta love raceface, no need for special tools of any kind. Getting greater respect for these guys all the time.

joby
Автор

Watched several How-To videos and yours is the best! No kidding. Before your video, I got the 10mm cap off and the 8mm bolt removed, and that crank was locked on so tight it might as well have been welded. So before I did something stupid I might regret which could lead to bloody knuckles, I watched a few more videos and finally came across yours with the tip to use the 10mm cap to "back-off" the crank. Worked so perfect I had to tell you! Thanks for your video.

douglasmankin
Автор

Great! Thanks a lot for the tip how to remove my cranks.. just the one change in the sequence I made.. 1) I removed big cap, 2) release the smaller bolt, 3) lube the plastic washer 4) screw the cap back 5) pull the crank out... anyway, it was realy pretty easy once I saw your video, thnx a lot again ;-)

vladimirpazdera
Автор

I love clear and bright lighted vids. Thanks for that. very good description. Cheers

raymondboyle
Автор

Installing RaceFace BB and Turbine crankset today. Thanks for the video!

sbturtle
Автор

Thanks mate, clearly described and easy to follow.

BodroghyWest
Автор

Perfect! Thanks, this helped a lot. Busted 3 teeth off my middle chain ring, and now I'm back in the saddle.

erichpearson
Автор

Going to try replacing my race face cranks tonight, should be straightforward thanks to this video 👍🏻

fusco
Автор

Useful video, what size torque wrench is that?

druiz
Автор

Thanks heaps, very helpful and I appreciated the clearly presented info.

siriannimick
Автор

Hi, what can I do if I lost that little piece that you saw in the beginning?

christos
Автор

Thanks for the 'how to' as I just bought a used fat bike with this crank set. What are the three metal protrusions with bolts that are attached to the frames bottom bracket, used for? I have the same and can't figure out their function.

vashember
Автор

hi what is the size of your oval chainring? is it a 104 bcd or a 120 bcd?

caipas
Автор

Do all crank puller works or is a special one I should get?

christos
Автор

Nice Video, Perfect to Remove and install your crank self

davidobuchowski
Автор

Good video bro...I need to clean mine..now I know how...thanks

KILLSHOTTAS
Автор

Nice vid. One question tho:Despite following guidelines step by step I've got play in my RF Aeffect crank. I changed out the BB but play remains. Think this is a spacer issue? Cheers.

hadoukennumber
Автор

thank you, just pulled my commuter out of storage and couldn't remember how to get the RF cranks off (last few bikes had XT)

MrRay
Автор

Hi, i have same RF cranks and when pedaling i can hear some noise/crackling going from BB (i think). Is this video should help??

ag_by
Автор

Hi! I reinstalled my cranks on the new BB x-type from race face. When I tighten the bolt (with the mounted washer), the cranks are not spinning ass freely as yours! But there was neither a washer or spacer on the old nor the new BB.

gogovitch