Complete Test & Review of Voro Motors Emove Cruiser | Electric Scooter Review | Commuter Scooter |

The review tests everything you need to know. Speed, range, power, hill climbing ability. This is a commuter scooter built for the big and bulky with a 350 pound weight limit and adjustable stem along with full suspension so the ride is quite smooth, one of the smoothest I've ridden.

Electric Revolution Website

Pick this up here and save $50 with code: "mike"

Jesus Christs New Testament Church has been restored

#emove #electricscooter #escoot

[samanthayoung]

*Came in today and my friend and I both rode **Latest.Bike** Scooter around for about an hour. Was lots of fun and didn't drain the battery much at all!*

[Imightberiding]

LocTite is your friend. I would stick (pun intended) with the Blue LocTite. Red is pretty much permanent & you need to heat it up to remove the screws & bolts risking damage to the surrounding parts & surfaces from the heat. A good practice on any scooter, bike, etc is to use blue LocTite on every fastener before extended use. Cheers.

[jimmythepirate]

Thank you for the detailed review. Based on your review, i just ordered an emove cruiser AND some ThreadLock, i used your code and in my state it offered me a $97.93 discount which is AMAZING. I know you dont know me but thank you none the less for saving a dude you dont know almost $100.00 USD! Now the shipping lesson...Patience is a virtue.

[marcialever]

Excellent review! You’re right, the cruiser is a scooter with a long range (I’ve been able to go beyond the advertised 62 miles on gear 2), great comfort, and decent acceleration. The top speed is between 25-30 mph—so this is a “cruiser” not a racer. Also, the bolts and screws get loose quite often. I usually take 15-20 minutes to tighten bolts and screws before I ride it. Other than that, the cruiser is a solid machine with low maintenance.

[franckgomez]

Nice review 👍 I ordered this scooter for his range and the IP6 water resistance rating. I’m around 95kg, i charge the cruiser once a week I’m having around 52km range and the voltmeter is still at 45v. I agree with the maintenance remarks, i do it once a week. But the emove cruiser is an excellent scooter. The speed is more than ok for daily commute. The range is huge. With 10 inch tyre and the discs brake make this scooter safe and comfortable. But if you are planning to fold and carry this scooter around, forget it. 😊 By the way I’m using the emove cruiser in Paris in France !

[mutlovrar]

I bought two Emove Cruisers in 2019 to bring awareness to my community on the alternate forms of transportation. My small city of 100k just does not think of using anything other than cars and trucks. Mostly with one occupant. I chose the Voro Emove Cruiser because of its advertised long range, hardiness, and speed. The range and speed are both exceptional. The hardiness is suspect. Voro sold both to me at wholesale price, $800 each since I was going to advertise their product. It was always a long shot in this community but worth a try. I made some riding videos which got plenty of views and fielded lots of curious questions. I have been able to send some referrals to Voro from those videos and conversations. Voro said they would pay me a small commission but in each case, I had to go to Voro asking why the commission payments stayed pending for six months after the sales.
Voro claims to be diligent in their pre shipping checks and high quality is supposedly the Voro watchword. When my two Emove Cruiser's arrived; both boxes were heavily damaged and literally smelled like garbage. Like they had been stored in a garbage can and not some quality warehouse. Upon opening the boxes, both scooters had dislodged screws just rattling in the boxes. I had to use some of my own hardware to fix parts. Voro said they would send replacement parts but never did. Its been over a year now.
I also ordered two accessory seats. Both installed ok but one has never worked correctly. The seat does not secure in a fixed position and will slowly lower during a ride. Voro would not correct this issue.
After riding about 300 miles of reasonably easy trips my wifes scooter started this wierd squeeking noise from her back shocks. I tried lubing the shock shafts and then just swapped them with the shocks on my scooter and the squeeking stopped for a time. After another 300 miles on my scooter, the squeeking has returned.
My scooter rear tire has started a slow leak and I have to refill before each ride. There are no screws or nails protruding so not sure where the leak is.
Overall, the scooters themselves have been fun but since I have never bought another brand, that is as far as I can go with comparisons. The Voro company though has a lot to be desired.

[centurionfitness]

Thank you for the 7 percent off. I will be purchasing my Emove Cruiser tomorrow.

[SteveChurchill]

To fix the loose screw problem once and for all: Pull every screw out and apply blue (non-permanent) threadlocker. It is made exactly for this situation. If you don't want to pull every screw out, just apply threadlocker to any screw that loosens. You can use red (permanent) threadlocker but you won't be able to remove the screw ever again unless you use a torch - not healthy for electronic boards, batteries, and plastic fenders.

Otherwise a great review!

[TheParentalRevolution]

Best review of the Emove I've seen. You should test more scooters.

[albertgutierrez]

Locktite is your best friend also try torquing down the bolts so the won’t come loose especially the stem mount never hurts to try just don’t do it to tight. FYI red locktite for those bolts you’ll never work on and blue for those you would.

[foxsinwolf]

Great vid, and when I got my crusier, the only screws that got loose was around the folding mechanism. That aside a little locktite fixed that. Speed wise on the other hand was fast, I was able to get 38mph on level ground and down a slight hill 46mph.

[wongtong]

About the speed displayed. I watched someone else’s video and they said the computer is set to a 10” tire when in reality the tire is only 9.25”. They also kinda of implied that this can be changed in the settings? They weren’t really clear on this.

[ericneilson]

I have the same scooter and none of the screws have come loose at all. Maybe they put a smaller size screw in yours?

[PANOPTIC-VIDS]

First thing I did when I purchased my Cruiser was put loctite on every screw except the brake calipers 🤘✌🇺🇸

[cjmorientes]

Ordered the Cruiser a month ago while I was out of town, opened it, tightened everything down, had it for 5 days and it ran great, decided to take it through some grass off road and burned the motor had to send it back, not sure if they are sending me a new one or just repaired the one I sent back we’ll see. I’m 6’5 250lbs.

[fergusobrien]

Hopefully all the updates have addressed those problems. The latest is due July 12th...thx for the review

[mauricebrown]

Having Same screw tightening problem on my inokim quick 3, would you believe Same design, thanks for heads up, biglove👊

[davidcook]

Just bought an Emove, from Voro Motors a couple months ago and love it. Good review, but disagree with a couple points. This thing gets up and goes. Less than $1, 500 with seat is a bargain, in my opinion.

[theF-Files]

I guess I made my decision I will get the Emove Cruiser for deliveries i been looking something with a lot of range and this fits the bill

[leocubiasmusiclifestyle]

Is it true if you upgrade the throttle, the scooter would go a couple of miles faster ?