electric gokart casero $100 dollars

Показать описание

cheaper electric gokart

Рекомендации по теме

Комментарии

If at 8:46 there were a message saying "professional driver on closed course" I would have been endlessly entertained. Great build.

DavidMannk

Que tal si colocas la lista de materiales y nos sugieres donde podríamos encontrarlos. 🤔

djsantomusic

Please let me know the name of electric device you are using to vary the voltage making it act like accelerator

onekraphael

Great proyect, I just want to commend few possible improvements that come to my mind:

1) Without a differential or a false differential (double free wheel) perhaps it would have been better to leave one of the two rear wheels free, and not fixed to the axle, to avoid the effect of drag in curves.

2) The axis is threaded, and is leaning directly on the bearings. This causes friction, and with this occurs premature wear of both the bar and the bearing. Ideally, this section should be smooth. This axis could be adapted by adding a very fine hollow pipe on those parts. If it is not fine enough, you would have to increase the size of the bearings to achieve it.

3) It is preferable to make a screw or bolt connection to the wheel, so that the wheel can be replaced using screwdrivers or wrenches, without having to change or modify the axle. I am not clear if the axle was fixed to the wheels or only to the adaptation, if it was the second case, the reverse could unscrew the wheel. That is why it is better 3 or 4 screws that fix to a spindle end.

PabloPaiva

Buenos días Filipo felicitaciones una pregunta el freno de disco es de bicicleta o de motocicleta gracias otra pregunta me puedes decir las medidas largo ancho y de que diámetro son los tubos que utilizastes para el chasis gracias desde Colombia

johnjairoospina

0:52 отличный узел, работающий на смазке из резьбы 😁. На полчаса его хватит.

bobboboff

Super, mais dommage qu'il n'y a pas le matériel utilisé dans les commentaires, car on ne sait pas quel est le modèle ou la puissance du moteur.

vvss

Saludos Filipo tv desde México
Gran talento.

alvaromexico

Good idea brother, but your rear wheel is to far from the frame it might dent when you run fast.👍👍.

samsien

Please, can you enlist items....

Or tell me the source where from I get it?

muhammadsuleman

Very nice. Please let me know about electric motor specifications. Thanks ❤

Hamid-az

Estimado una consulta el motor que estás usado en donde lo. Compraste

wilfredoalvarado

Brilliant idea using threaded studding as axle, , thanks

Shakingstevesallotment

Esta buena la idea nada que veo unos problemas, ,el primero el tipo de motor segun veo es un arranque de moto, ,no durara mucho porque se le acabaran los carbones o escobillas del motor, ,,lo ideal seria un motor sin carbones o escobillas , ,por ejemplo un motor de overboard seria el ideal, ,pero tambien se puede con un alternador de carro, ,aunque el mas eficiente es el motor de overboard

erickjuegasv